All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (100 mm) high minimum and 7 inches (180 mm) high maximum....
Search Results "Aisle Stair"
-
504.2 Treads and Risers
-
Walk-A-Sured Roll-On Anti-Slip Safety Coating System
Great for any foot traffic applications such as ramps, docks, stairs, amusement parks and around slippery wet areas Chemical, solvent and water resistant...
-
Special Technical Provisions for Alterations to Existing Buildings and Facilities [4.1.6(3)]
Special provisions also address stairs, elevators, doors, toilet rooms, assembly areas, platform lifts, and dressing rooms....
-
Stacks [8.5]
Elements fixed to stacks, such as ladders, cannot reduce the minimum passage width nor should signs or other elements between 27 to 80 inches above the floor project more than 4 inches into aisles...
-
Section 4.1.3, Accessible Buildings: New Construction (Preamble, Section-by-Section Analysis)
Sections 4.1.3 (1) through (4) cover accessible routes, protruding objects, ground and floor surfaces, and stairs....
-
Section 4.1.3, Accessible Buildings: New Construction (Section-By-Section Analysis and Response to Comments)
Sections 4.1.3 (1) through (4) cover accessible routes, protruding objects, ground and floor surfaces, and stairs....
-
§382.63(b)
(b) With respect to aircraft with only one aisle in which lavatories are provided, you may, but are not required to, provide an accessible lavatory....
-
§ 38.59 Floor surfaces
Floor surfaces on aisles, places for standees, and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant....
-
§ 38.153(a)
(a) Floor surfaces on aisles, step treads and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant....
-
§ 38.117(a)
(a) Floor surfaces on aisles, step treads and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant....
-
The Dipstick® Floor Profiler Tool
Excel version of "1155 Helper" Is delivered as kit in custom Zero Haliburton case Calculates "1/2 in ten and 1/4 in ten" and TR-34 New- Can produce Fmin reports for defined traffic aisles...
-
11B-203.10 Raised refereeing, judging, and scoring areas
An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
-
11B-203.10 Raised refereeing, judging, and scoring areas
An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
-
11B-203.10 Raised refereeing, judging, and scoring areas
An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
-
4.3.5.3 180-degree turn around an obstacle
In our research, we studied the impact of keeping the depth of the turning area and the entry/egress aisle width identical....
-
504.2 Treads and Risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (100 mm) high minimum and 7 inches (180 mm) high maximum....
-
2.2 Entrances
If there are stairs at entrances, are there also ramps or lifts? Can the accessible entrance be used independently, or is the door heavy or usually locked?...
-
504.2 Treads and Risers
All steps on a flight of stairs shall have uniform riser heights and uniform tread depths. Risers shall be 4 inches (100 mm) high minimum and 7 inches (180 mm) high maximum....
-
You must allow service animals to accompany passengers with disabilities in the cabin
You must allow the service animal to sit in close proximity to its user, as long as the service animal does not block the aisle or other emergency evacuation route in violation of FAA safety...
-
11B-207.1 General
The 2022 CBC Section 1013.4 requires such a door to be identified by a tactile exit sign with the following words “EXIT STAIR DOWN” or EXIT STAIR UP”....
-
Design Guidelines for the Visual Environment
This design guideline addresses planning and design of a building and site, including all features used to access the building or facility, such as walkways and pathways, stairs, and ramps...
-
§ 38.79(a)
(a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant....
-
§ 38.99(a)
(a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant...
-
Minimum Number of Accessible Parking Spaces
Standards for Accessible Design 4.1.2(5) Total Number of Parking Spaces Provided (per lot) (Column A) Total Minimum Number of Accessible Parking Spaces (60" & 96" aisles...
