A toilet compartment is a partitioned space that is located within a toilet room, and that normally contains no more than one water closet....
Search Results "Wheelchair Space (Recreation)"
Filters
Commonly Searched Documents
-
11B-213.3.1 Toilet compartments
-
T702.6 Character Spacing
Character spacing shall be measured between the two closest points of adjacent characters, excluding word spaces....
-
Ground Surfaces: ADA Standard Section 1008.2.6
Ground surfaces on accessible routes, clear floor or ground spaces, and turning spaces shall comply with 1008.2.6. Advisory 1008.2.6 Ground Surfaces....
-
1009.5.2 Transfer Space
1009.5.2 Transfer Space....
-
Gangway Slope and Rise Exceptions
For example, where a non-gangway sloped walking surface greater than 1:20 (5%) is provided as part of an accessible route connecting accessible spaces of a boating facility, it must comply...
-
R305.1.2 Dome Spacing
R305.1.2 Dome Spacing....
-
M. Turning Space
Is there an area in each public restroom in which a person who uses a wheelchair can turn around - either a 60" diameter circle or a "T"-shaped turn area as shown in Figure 3 below?...
-
"Other Power-Driven Mobility Device" and "Wheelchair" (Section-by-Section Analysis)
‘‘Other Power-Driven Mobility Device'' and ‘‘Wheelchair'' (Section-by-Section Analysis) Because relatively few individuals with disabilities were using nontraditional mobility devices...
-
304 Turning Space
[See subsections ...]
-
Focus Forward Films: Seatrac
After an accident left Makis unable to swim, he decided to do something for him and for every disabled person.
-
Mass Audubon's Accessible Trails Manual
In 2014, the Institute of Museum and Library Services (IMLS) provided funding to produce a comprehensive guidelines manual for developing and sustaining an accessible interpreted...
-
705.1.2 Dome Spacing
705.1.2 Dome Spacing....
-
Protruding Objects [1016.9]
Objects that protrude into ORARs, passing spaces, and resting intervals can pose hazards to people who are blind or have low vision....
-
1009.5.2 Transfer Space
A transfer space of 60 inches (1525 mm) minimum by 60 inches (1525 mm) minimum with a slope not steeper than 1:48 shall be provided at the base of the transfer platform surface and shall...
-
12162(a)(2)(C)(i)
(i) be able to be entered from the station platform by an individual who uses a wheelchair; or...
-
Clear Floor or Ground Space
Clear Floor or Ground Space At least one clear floor or ground space (30 inches by 48 inches minimum) must be provided at each location that has a railing height of 34 inches maximum....
-
11B-203.4 Limited access spaces
Spaces not customarily occupied and accessed only by ladders, catwalks, crawl spaces, or very narrow passageways shall not be required to comply with these requirements or to be on an accessible...
-
11B-203.4 Limited access spaces
Spaces not customarily occupied and accessed only by ladders, catwalks, crawl spaces, or very narrow passageways shall not be required to comply with these requirements or to be on an accessible...
-
National Center on Accessibility at Indiana University Bloomington
Over the last two decades, NCA has emerged as a leading authority on access issues unique to park and recreation programs and facilities....
-
R304.5.5 Clear Space
R304.5.5 Clear Space....
-
F245.4.2 Routes to and within Common Use and Public Use Areas
This section requires at least one outdoor recreation access route to connect each picnic unit with mobility features with common use and public use areas serving the unit; and at least...
-
E202.4 ICT Functions Located in Maintenance or Monitoring Spaces
Where status indicators and operable parts for ICT functions are located in spaces that are frequented only by service personnel for maintenance, repair, or occasional monitoring of equipment...
-
705.1.2 Dome Spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
705.1.2 Dome Spacing
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
