Wheelchair securement systems complying with the technical requirements in T603 must be provided at each wheelchair space....
Search Results "Patient Seated in Wheelchair"
-
T211 Wheelchair Securement Systems
-
Sec.36.304(b)(15)
(15) Installing a raised toilet seat;...
-
§ 36.304(b)(15)
(15) Installing a raised toilet seat;...
-
Seat Height
Seat Height The lift must be designed so that the seat will make a stop between a minimum of 16 inches and maximum of 19 inches (measured from the deck to the top of the seat surface,...
-
Figure 1002.4.4.3 Protrusions in Wheelchair Spaces in Amusement Rides – Drawing from the U.S. Access Board
-
1009.6.3 Size
Each area of refuge shall be sized to accommodate two wheelchair spaces that are not less than 30 inches by 52 inches (762 mm by 1320 mm)....
-
1009.6.3 Size
Each area of refuge shall be sized to accommodate two wheelchair spaces that are not less than 30 inches by 52 inches (762 mm by 1320 mm)....
-
11B-805.2 Patient bedrooms and resident sleeping rooms
Patient bedrooms and resident sleeping rooms required to provide mobility features shall comply with Section 11B-805.2....
-
11B-805.2 Patient bedrooms and resident sleeping rooms
Patient bedrooms and resident sleeping rooms required to provide mobility features shall comply with Section 11B-805.2....
-
11B-805.2 Patient bedrooms and resident sleeping rooms
Patient bedrooms and resident sleeping rooms required to provide mobility features shall comply with Section 11B-805.2....
-
F223.2.1 Facilities Not Specializing in Treating Conditions That Affect Mobility
In facilities not specializing in treating conditions that affect mobility, at least 10 percent, but no fewer than one, of the patient sleeping rooms shall provide mobility features complying...
-
T603 Wheelchair Securement Systems
The technical requirements in the 2016 Non-Rail Vehicle Guidelines for wheelchair securement systems include provisions on orientation, design load, movement, and rear-facing wheelchair...
-
4.32.1 Minimum Number
Fixed or built-in seating or tables required to be accessible by 4.1 shall comply with 4.32....
-
Wheelchair Passage Width [4.2.1] and Passing Space [4.2.2]
A clear width of at least 48 inches (recommended but not required) allows for comfortable flow for people who use wheelchairs and people who are ambulatory....
-
5.4.1.2 Transfer and Positioning Support Location for Imaging Equipment
5.4.1.2 Transfer and Positioning Support Location for Imaging Equipment. Transfer supports should be provided for imaging equipment with transfer surfaces with depths of less than or...
-
M301.3.2 Leg Supports (Section-by-Section Analysis)
In the MDE NPRM, the Access Board proposed to place the requirements for stirrups on diagnostic equipment used by patients in the supine, prone, or side-lying position in M301....
-
Fixed or Built-in Seating and Tables [4.32]
[See subsections ...]
-
A4.32 SEATING, TABLES, AND WORK SURFACES
[See subsections ...]
-
T210.1 General
Non-rail vehicles shall provide wheelchair spaces in accordance with T210....
-
4.32.1 MINIMUM NUMBER
Fixed or built-in seating, tables, or work surfaces required to be accessible by 4.1 shall comply with 4.32....
-
206.7.2 Wheelchair Spaces
206.7.2 Wheelchair Spaces....
-
T210.2 Large non-rail vehicles
Large non-rail vehicles shall provide at least two wheelchair spaces complying with T602....
-
T210.3 Small non-rail vehicles
Small non-rail vehicles shall provide at least one wheelchair space complying with T602....
-
Approach: ADA Standard Section 604.8.1.3
Section 604.8.1.3 covers the current ADA Standards for the arrangement of toilet compartments to provide for left or right-handed approach to the water closet.
