The platform may be marked to indicate a preferred standing position....
Search Results "Horizontal Position"
-
§ 38.159(b)(12) Use by standees
-
11B-807.2.3 Beds
The clear floor space shall be positioned for parallel approach to the side of the bed....
-
§ 38.83(b)(12) Use by standees
The lift may be marked to indicate a preferred standing position....
-
11B-807.2.3 Beds
The clear floor space shall be positioned for parallel approach to the side of the bed....
-
Evaluation of transfers
Our study suggests that for a horizontal grab bar mounted in front of the element, the ideal height is between 30”-33” (76.2-83.8cm) high. ...
-
5.8.2.7 Base Support Allowance Recommendation
Industry input indicated that customer feedback was one of the major drivers to position the displays at that location....
- Delta 3-Setting 2-Port Diverter Trim T11859
- Delta 3-Setting 2-Port Diverter Trim T11861
- iLove Stories of Independence: Todd Stabelfeldt
-
§382.133(d)(1)
(1) A POC, a ventilator, a respirator or a continuous positive airway pressure machine that displays a manufacturer's label according to FAA requirements in circumstances where requirements...
-
4. Faucet Controls
Are the faucet controls and shower wand positioned on the wall along the side of the shower seat so they are operable from the folding shower seat or from the shower wheelchair?...
-
11B-604.9.3 Height
Seats shall not be sprung to return to a lifted position....
-
Side guard protocol
Then from initial setup, the horizontal distance between the wheelchair and platform was incrementally increased and the maximum attainable gap distance was recorded....
-
704.11.1 Parapet construction
Where the roof slopes toward a parapet at a slope greater than two units vertical in 12 units horizontal (16.7-percent slope), the parapet shall extend to the same height as any portion...
-
1132A.4.1 Thresholds
Thresholds with a change in height between ¼ inch (6.35 mm) and 3/4 inch (19.05 mm) shall be beveled with a slope no greater than 1 unit vertical in 2 units horizontal (50-percent slope)...
-
1009.2.4 Seat Height
lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised (load) position...
-
§ 1194.25(j)(1)
(1) The position of any operable control shall be determined with respect to a vertical plane, which is 48 inches in length, centered on the operable control, and at the maximum protrusion...
-
1004.1 Clear Floor Space
Exercise machines and equipment shall have a clear floor space complying with 305 positioned for transfer or for use by an individual seated in a wheelchair....
-
1004.1 Clear Floor Space
Exercise machines and equipment shall have a clear floor space complying with 305 positioned for transfer or for use by an individual seated in a wheelchair....
-
4.33.3* Placement of Wheelchair Locations
EXCEPTION: Accessible viewing positions may be clustered for bleachers, balconies, and other areas having sight lines that require slopes of greater than 5 percent....
-
Road Racing Wheelchairs
Typically, a low seating position is preferred to increase stability and decrease resistance....
-
Can doors swing into required clear floor or ground space?
floor space required at benches in saunas and steam rooms (612.2) clear floor space required at tactile signs, which must be beyond the arc of any door swing between the closed position...
-
4. Obstructions
For fixed route services, a passenger's request for a driver to position the vehicle to avoid obstructions to the passenger's ability to enter or leave the vehicle at a designated stop location...
-
§ 38.83(b)(2)(i) Requirements
., ground, curb, and intermediate positions) normally encountered in the operating environment....