A portion of the counter surface that is 36 inches (914 mm) long minimum and 34 inches (864 mm) high maximum shall be provided....
Search Results "High-Low Drinking Fountain"
Filters
Commonly Searched Documents
-
11B-904.4.2 Forward approach
-
Sloan Royal® Exposed Water Closet Flushometer
FEATURES: Flush volumes start as low as 1.28 gpf/4.8 Lpf Water conservation is aided by the ADA-compliant, non-hold-open handle, which prevents toilet from exceeding intended flush...
-
M301.2.1, M302.2.1 Transfer Height
Rationale: Early studies are showing that achieving a low height for stretchers in the 17"-19" range to be very difficult due to the various roles of stretchers being not only diagnostic...
-
Reduced Visual Acuity
The major causes of functional limitations from low vision or reduce visual acuity (slide 27)....
-
Scoping Requirements for Elevators
Limited-use/limited-application (LULA) elevators are typically smaller and slower than other passenger elevators and are used for low-traffic, low-rise installations, including residential...
-
d. Problem: Videos and Other Multimedia Lack Accessible Features
On the other hand, persons who are blind or have low vision are frequently unable to see the video images but can hear the audio track....
-
§ 38.159(c)(4) Ramp barriers
Each side of the ramp shall have barriers at least 2 inches (50 mm) high to prevent mobility aid wheels from slipping off....
-
§ 38.95(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
§ 38.125(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
§ 38.83(c)(4) Ramp barriers
Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
11B-411.2.3.1 Floor designation signs
Raised characters shall be 2 inches (51 mm) high. A raised star placed to the left of the floor designation, shall be provided on both jambs at the main entry level....
-
Exam Tables and Chairs
Exam Tables and Chairs Traditional fixed-height exam tables and chairs (also called treatment tables or procedure tables) are too high for many people with a mobility disability to use...
-
Grab bar protocol
Although presented with the option to change the front grab bar height, subjects chose the same height for all the low height and high height transfers as they used when the side guard was...
-
Cross Slope
Where floating piers are grounded out due to low water conditions, slope requirements would not apply....
-
Problem Two (Entrance)
Problem Two: The entrance door threshold is one inch high....
-
Signage
• Precise directional and informational signage in high-contrast colors with clear, large type and good lighting make shopping more comfortable for people with diminished short-term memory...
-
Printed materials
• Printed programs, advertisements, and brochures with large, clear type, in high contrast colors on solid backgrounds on satin- or matte-finish paper are more legible for people with...
-
5.8.1.2.3 Double Ramped Entry – Edge Protection on the Platform Sides
A minimum 2 inch high edge protection must be provided on both sides of the platform for double ramped entry platforms....
-
ADA Requirements - Testing Accommodations
Department of Justice Civil Rights Division Disability Rights Section Testing Accommodations Standardized examinations and other high-stakes tests are gateways to educational...
-
Standards that measure needed physical or mental ability to perform a job
However, if a position in a mailroom required as a qualification standard that the person in the job be able to reach high enough to place and retrieve packages from 6-foot high shelves,...
-
5. If there is a significant risk, reasonable accommodation must be considered
For example: A deaf bus mechanic was denied employment because the transit authority feared that he had a high probability of being injured by buses moving in and out of the garage....
-
Section I: Elevators
(§407.4.1) I3 Are hallway elevator call buttons 48" high or lower?...
-
M305.3.2 Height (Section-by-Section Analysis)
For vertical supports, the MDE NPRM proposed that the bottom end of the support be 34 inches high minimum and 37 inches high maximum above the standing surface....
-
Vertical Clearance [§307.4]
Vertical Clearance [§307.4] Headroom clearance of at least 80” high is required along all circulation paths (except at doors and doorways where a 78” minimum clearance is permitted to...
