This example of a retail facility shows how scoping requirements for certain elements and spaces (sales counters and fitting rooms) apply and indicates employee work areas....
Search Results "Assembly Area"
-
Example: Retail Facility
- Unity Surfacing Systems Play-Land Safety Surfacing
-
11B-207.1 General
Areas of refuge shall not be required in detention and correctional facilities. Accessible means of egress are not required to be provided in existing buildings....
-
F202.4 Alterations Affecting Primary Function Areas
Camping facilities, picnic facilities, viewing areas, trailheads, trails, and beach access routes shall not be required to comply with F202.4....
- PlayLSI: A Higher Level of Inclusive Play
- WoodCarpet Ground Surface System: WoodCarpet Mat Installation Video
- SoloRider: Accessible Golf Cart Operational Video
- Braille Trails: Helping the Visually Impaired Experience Nature
-
11B-302.1 General
Within animal containment areas, floor and ground surfaces shall not be required to be stable, firm, and slip resistant. 2. ...
-
11B-302.1 General
Within animal containment areas, floor and ground surfaces shall not be required to be stable, firm, and slip resistant. 2. ...
-
11B-302.1 General
Exceptions: Within animal containment areas, floor and ground surfaces shall not be required to be stable, firm, and slip resistant....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
11B-1002.5.2 Transfer height
The height of amusement ride seats designed for transfer shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
15. Laundry rooms
Laundry rooms 4.32.6 If provided in the facility or at the site, at least one of each type of appliance provided in each laundry area, except that laudry rooms serving covered multifamily...
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
F245.4.2 Routes to and within Common Use and Public Use Areas
This section requires at least one outdoor recreation access route to connect each picnic unit with mobility features with common use and public use areas serving the unit; and at least...
-
11B-809.5.5.1 Notification
Where visible doorbell signals are located in sleeping areas, they shall have controls to deactivate the signal....
-
11B-809.5.5.1 Notification
Where visible doorbell signals are located in sleeping areas, they shall have controls to deactivate the signal....
-
Notification: ADA Standard Section 809.5.5.1
Where visible doorbell signals are located in sleeping areas, they shall have controls to deactivate the signal....
-
4.3.11.4* Two-way Communication
A method of two-way communication, with both visible and audible signals, shall be provided between each area of rescue assistance and the primary entry....
-
A. Passenger Drop-Off Areas
Passenger Drop-Off Areas During an evacuation the most efficient method of transporting people to shelters likely will include using vans and buses....
-
11B-1008.2.6.1 Accessibility
Ground surfaces shall comply with ASTM F 1951. Ground surfaces shall be inspected and maintained regularly and frequently to ensure continued compliance with ASTM F 1951.
-
11B-1008.2.5.3.2 Handrail height
The top of handrail gripping surfaces shall be 20 inches (508 mm) minimum and 28 inches (711 mm) maximum above the ramp surface.
