Swinging door and gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
Search Results "Ramp Surface"
-
11B-404.2.10 Door and gate surfaces
-
11B-1002.4.1 Floor or ground surface
The floor or ground surface of wheelchair spaces shall be stable and firm....
-
11B-1002.4.1 Floor or ground surface
The floor or ground surface of wheelchair spaces shall be stable and firm....
-
E. Level Surface
Are the level surfaces of accessible parking spaces and access aisles free of "built-up" curb ramps so persons who use mobility aids (e.g.: wheelchairs, walkers or crutches) can make convenient...
-
11B-809.8.3.1 Floor or ground surface
Floor or ground surface within required maneuvering clearances shall not have slopes exceeding 1:48....
-
Length: ADA Standard Section 405.7.3
Section 405.7.3 covers the current ADA Standards for the required length of ramp landings.
-
11B-502.4 Floor or ground surfaces
Advisory 11B-502.4 Floor or ground surfaces. Access aisles are required to be nearly level in all directions to provide a surface for wheelchair transfer to and from vehicles....
-
11B-502.4 Floor or ground surfaces
Advisory 11B-502.4 Floor or ground surfaces. Access aisles are required to be nearly level in all directions to provide a surface for wheelchair transfer to and from vehicles....
-
11B-406.3 Parallel curb ramps
Parallel curb ramps shall comply with Sections 11B-406.3 and 11B-406.5. A parallel curb ramp may be provided with one sloping segment or two opposing sloping segments....
-
11B-406.3 Parallel curb ramps
Parallel curb ramps shall comply with Sections 11B-406.3 and 11B-406.5. A parallel curb ramp may be provided with one sloping segment or two opposing sloping segments....
-
Wet Conditions: ADA Standard Section 405.10
Section 405.10 covers the current ADA Standards for wet conditions at ramp landings.
-
11B-405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with Section 11B-405.7. Advisory 11B-405.7 Landings....
-
11B-405.7 Landings
Ramps shall have landings at the top and the bottom of each ramp run. Landings shall comply with Section 11B-405.7. Advisory 11B-405.7 Landings....
-
Floor or Ground Surfaces: ADA Standard Section 304.2
Section 304.2 covers the current ADA Standards for the ground surfaces of a turning space.
-
Is My Ramp ADA Compliant?
-
R407.3 Cross Slope
The cross slope of ramp runs shall be 2 percent maximum....
-
1.1.5
1.1.5 A maximum design cross slope for accessible exterior pedestrian paving and ramps of 1.5% (1:67 or about 3/16 in. per ft. [15 mm per m]) is recommended....
-
11B-406.1.2 Parallel curb ramps
Parallel curb ramps shall comply with Section 11B-406.3....
-
11B-406.1.1 Perpendicular curb ramps
Perpendicular curb ramps shall comply with Section 11B-406.2....
-
11B-406.1.1 Perpendicular curb ramps
Perpendicular curb ramps shall comply with Section 11B-406.2....
-
11B-406.1.2 Parallel curb ramps
Parallel curb ramps shall comply with Section 11B-406.3....
-
11B-406.2 Perpendicular curb ramps
Perpendicular curb ramps shall comply with Sections 11B-406.2 and 11B-406.5....
-
11B-406.2 Perpendicular curb ramps
Perpendicular curb ramps shall comply with Sections 11B-406.2 and 11B-406.5....
-
Curb Ramps: ADA Standard Section 406
Section 406 covers the current ADA Standards for curb ramps.
