The width between handrails shall be 20 inches (510 mm) minimum and 24 inches (610 mm) maximum. Handrail extensions required by 505.10.3 shall not be required on pool stairs....
Search Results "Handrail Diameter"
Filters
Commonly Searched Documents
-
1009.6.2 Handrails
-
1009.6.2 Handrails
The width between handrails shall be 20 inches (510 mm) minimum and 24 inches (610 mm) maximum. Handrail extensions required by 505.10.3 shall not be required on pool stairs....
-
HANDRAIL
HANDRAIL. A horizontal or sloping rail intended for grasping by the hand for guidance or support....
-
Figure 505.10.3 Bottom Handrail Extension at Stairs – Drawing from the U.S. Access Board
-
Figure 505.10.2 Top Handrail Extension at Stairs – Drawing from the U.S. Access Board
-
R217 Handrails (Section-by-Section Analysis)
R217 Handrails (Section-by-Section Analysis) Handrails are not required on pedestrian circulation paths....
-
Can handrails be attached to guard rails?
Yes, handrails can be installed on guard rails if all applicable requirements are met....
-
Figure 505.10.1 Top and Bottom Handrail Extension at Ramps – Drawing from the U.S. Access Board
-
Inpro Corporation IPC® 2000 Handrail
Requires the Premium User plan or above. (Login or upgrade your account!) -
Inpro Corporation IPC® 900 Handrail
Requires the Premium User plan or above. (Login or upgrade your account!) -
504.6 Handrails
504.6 Handrails. Stairs shall have handrails complying with 505....
-
R408.6 Handrails
R408.6 Handrails. Stairways shall have handrails complying with R409....
-
4.8.5* Handrails
If a ramp run has a rise greater than 6 in (150 mm) or a horizontal projection greater than 72 in (1830 mm), then it shall have handrails on both sides....
-
R407.8 Handrails
R407.8 Handrails. Ramp runs with a rise greater than 150 mm (6 in) shall have handrails complying with R409....
-
1009.3.3 Handrails
At least two handrails complying with 505 shall be provided on the sloped entry....
-
4.9.4 Handrails
Stairways shall have handrails at both sides of all stairs. Handrails shall comply with 4.26 and shall have the following features:...
-
1009.3.3 Handrails
At least two handrails complying with 505 shall be provided on the sloped entry....
-
AJW Architectural Products UG120-Railing UG120X-Y108 108" Exposed Flange, 1.25" Diameter, Peened Grip - Configuration Y
Product Features 1 1/4" bar diameter. Exposed Flange. Custom sizes available upon request. Peened saftey grip....
-
11B-1009.6.2 Handrails
The width between handrails shall be 20 inches (508 mm) minimum and 24 inches (610 mm) maximum....
-
11B-1009.6.2 Handrails
The width between handrails shall be 20 inches (508 mm) minimum and 24 inches (610 mm) maximum....
-
11B-1009.6.2 Handrails
The width between handrails shall be 20 inches (508 mm) minimum and 24 inches (610 mm) maximum....
-
AJW Architectural Products UG3-Railing UG3X-Y108 108" Concealed Snap Flange, 1.5" Diameter, Peened Grip - Configuration Y
Product Features 1 1/2" bar diameter. Snap flange. Custom sizes available upon request. Peened safety grip....
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
Inpro Corporation IPC® 940 Smooth Handrail with Reveal
Requires the Premium User plan or above. (Login or upgrade your account!)
