Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (100 mm) minimum and 6¼ inches (160 mm) maximum, and a cross-section dimension of...
Search Results "Grip Strength"
-
505.7.2 Non-Circular Cross Sections
-
505.7.2 Non-Circular Cross Sections
Handrail gripping surfaces with a non-circular cross section shall have a perimeter dimension of 4 inches (100 mm) minimum and 6¼ inches (160 mm) maximum, and a cross-section dimension of...
-
Cybex Total Access Leg Extension Exercise Machine
The push down lever is easy to operate for users with a limited grip. Side Handles Side handles parallel to seat side to assist with transfer....
-
Circular Cross Section and Clearance (§505.5, §505.7)
Circular Cross Section and Clearance
-
M305.3.2 Height (Section-by-Section Analysis)
For horizontal supports, the MDE NPRM proposed a gripping surface height of 34 inches minimum and 38 inches maximum above the standing surface....
-
§ 38.115(a)
The diameter or width of the gripping surface of interior handrails and stanchions shall be 11/4 inches to 11/2 inches or shall provide an equivalent gripping surface....
-
M305.3.2.1 Horizontal Position
The height of the top of the gripping surface on horizontal standing supports shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum above the standing surface....
-
M305.3.1.1 Horizontal Position
The length of gripping surfaces on horizontal standing supports shall be 4 inches (100 mm) minimum except for diagnostic equipment containing a wheelchair space which shall comply with M305.3.1.2...
-
Cybex Total Access Cable Column Exercise Machine
Height Adjustment Lever Pistol grip height adjustment enables adjustment of start height with one hand, essential for amputees and stroke users....
-
Cybex Total Access Leg Press Exercise Machine
No grip is required....
-
2. Standing Supports
For horizontal standing supports, the Access Board proposed a gripping surface of 4 inches long minimum, the top of which would be required to be located 34 inches minimum and 38 inches...
-
Non-Circular Cross Section and Clearance (§505.5, §505.7)
Non-Circular Cross Section and Clearance Recommendation: Projecting objects above handrails can impact their usability. Keep wall surfaces above handrails free of any...
-
Apex Challenge Circuit CH7000
This space efficient, single stack unit enables individuals with varied arm and hand strength to perform at a comfortable level with little or no assistance....
-
Hoist HD-1900 Dual Pulley System
Now, with over a dozen dual or multi-function stations, HOIST® can provide a state-of-the-art strength circuit for almost any center....
-
M305.3.1.3 Vertical Position
The length of the gripping surface on vertical standing supports shall be 18 inches (455 mm) minimum....
-
Cybex Total Access Seated Leg Curl Exercise Machine
Regardless of the starting position, the Cybex patent pending ROM adjustment ensures the cam moves to maintain the correct strength profile for the user....
-
M305.3.2.2 Vertical Position
The height of the lowest end of the gripping surface on vertical standing supports shall be 34 inches (865 mm) minimum and 37 inches (940 mm) maximum above the standing surface....
-
M305.3.1 Horizontal Position
Where the support is horizontal, the top of the gripping surface shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum above the standing surface....
-
5.4.6 Transfer Support Gripping Surface Cross Section and Clearances for M301, M302, and M305.2
The provision addresses gripping surface diameter and perimeter of the support. NPRM Proposed Provision: gripping surface cross section not addressed....
-
M305.2.6 Gripping Surfaces (Section-by-Section Analysis)
The proposed rule did not provide any specific requirements regarding gripping surfaces on transfer supports....
-
Figure 505.7.2 Handrail Non-Circular Cross Section – Drawing from the U.S. Access Board
-
Wheelchair Fitness Solution™ Complete Fitness System
Pedaling - Complete upper-body cardio workout with adjustable resistance Chin-Up Bar - Multiple positions allow you to adjust for optimal height Parallel Bars - Build arm strength...
-
4.8.5* HANDRAILS
(4) Gripping surfaces shall be continuous. (5) Top of handrail gripping surfaces shall be mounted between 30 in and 34 in (760 mm and 865 mm) above ramp surfaces....
-
4.9.4 HANDRAILS
(4) Gripping surfaces shall be uninterrupted by newel posts, other construction elements, or obstructions....
