Non-Circular Cross Section and Clearance Recommendation: Projecting objects above handrails can impact their usability. Keep wall surfaces above handrails free of any...
Search Results "Grip Strength"
Commonly Searched Documents
-
Non-Circular Cross Section and Clearance (§505.5, §505.7)
- Apex Challenge Circuit CH7000
- Hoist HD-1900 Dual Pulley System
-
M305.3.1.3 Vertical Position
The length of the gripping surface on vertical standing supports shall be 18 inches (455 mm) minimum....
- Cybex Total Access Seated Leg Curl Exercise Machine
-
M305.3.2.2 Vertical Position
The height of the lowest end of the gripping surface on vertical standing supports shall be 34 inches (865 mm) minimum and 37 inches (940 mm) maximum above the standing surface....
-
5.4.6 Transfer Support Gripping Surface Cross Section and Clearances for M301, M302, and M305.2
The provision addresses gripping surface diameter and perimeter of the support. NPRM Proposed Provision: gripping surface cross section not addressed....
-
M305.2.6 Gripping Surfaces (Section-by-Section Analysis)
The proposed rule did not provide any specific requirements regarding gripping surfaces on transfer supports....
-
M305.3.1 Horizontal Position
Where the support is horizontal, the top of the gripping surface shall be 34 inches (865 mm) minimum and 38 inches (965 mm) maximum above the standing surface....
- Figure 505.7.2 Handrail Non-Circular Cross Section – Drawing from the U.S. Access Board
-
4.8.5* HANDRAILS
(4) Gripping surfaces shall be continuous. (5) Top of handrail gripping surfaces shall be mounted between 30 in and 34 in (760 mm and 865 mm) above ramp surfaces....
- Wheelchair Fitness Solution™ Complete Fitness System
-
4.9.4 HANDRAILS
(4) Gripping surfaces shall be uninterrupted by newel posts, other construction elements, or obstructions....
-
Circular Cross Section and Clearance (§505.5, §505.7)
Circular Cross Section and Clearance (§505.5, §505.7)
-
5.4.9 Interruptions along Transfer Support Gripping Recommendation for M301 and M302
At the point of connection, these features impede the ability to grasp completely around the cross section of the gripping surface....
-
5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302
5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302 Description: A clearance around the gripping surface is necessary to ensure sufficient space for a person...
- Greenfields Outdoor Fitness Two-Person Accessible Lat Pull GR2005-1-48-W
- Greenfields Outdoor Fitness Two-Person Accessible Vertical Press GR2005-1-47-W
- Greenfields Outdoor Fitness Accessible Hand Cycle HP2009-7-21
- Greenfields Outdoor Fitness Two-Person Accessible Combo Butterfly and Reverse Fly GR2005-1-48E-W (2 Configurations)
- TechnoGym® - Radiant Inclusive Commercial Fitness System
- Cybex Total Access Overhead Press Exercise Machine
- Greenfields Outdoor Fitness Accessible Reverse Butterfly GR2005-1-90-W
- Greenfields Outdoor Fitness Accessible Butterfly GR2005-1-08-W