[See subsections ...]
Search Results "Adjustable Height Counter"
-
11B-904 Check-out aisles and sales and service counters
-
Transfer Protocols
The first platform was adjusted to be level with the participant’s WMD seat height....
-
902.3 Height
902.3 Height. The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
-
7.3(2)
(2) Clear aisle width for accessible check-out aisles shall comply with 4.2.1 and maximum adjoining counter height shall not exceed 38 in (965 mm) above the finish floor....
-
Q1.) When a ramp has a maximum slope of 1:12 or 8.33%, is that considered a range of from 0% to 8.33% which would allow no slope greater than 8.33% or is that a simple maximum which would allow a tolerance above 8.33%? Similarly, is a cabinet countertop that can be no higher than 34” AFF a range of from 0” to 34” AFF with no additional height allowed, or is a tolerance allowed for variations in the floor surface or cabinet construction?
A1.) The consistent technical assistance on this question has been that both are subject to tolerances.
-
Varidesk Pro Desk Series: the Pro Desk 60
There are 5 different series of sit to stand adjustable desk from Varidesk. In this video we give a quick overview of the different series....
-
Smith System Husky Square Activity Table
Available in two height ranges, 15-24″ and 21-30″, 48 x 48″ table top size....
-
227 and 904 Sales and Service
[See subsections ...]
-
227.3 Counters
227.3 Counters. Where provided, at least one of each type of sales counter and service counter shall comply with 904.4....
-
F227.3 Counters
Where provided, at least one of each type of sales counter and service counter shall comply with 904.4....
-
227.3 Counters
Where provided, at least one of each type of sales counter and service counter shall comply with 904.4....
-
R212.5 Counters
R212.5 Counters. Counters shall comply with section 904 of Appendix D to 36 CFR part 1191....
-
III. CONCLUSION
For the foregoing reasons, neither Section 904.4.1 nor its exception requires clear counter space at sales and service counters subject to the ADA’s requirements....
-
11B-231.4.1 Cubicles and counters
Where counters are provided, at least one shall comply with Section 11B-904.4.2 on both the visitor and detainee sides....
-
11B-231.4.1 Cubicles and counters
Where counters are provided, at least one shall comply with Section 11B-904.4.2 on both the visitor and detainee sides....
-
Transfer Height: ADA Standard Section 1002.5.2
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
General: ADA Standard Section 227.1
Section 227.1: General Scoping Requirements for sales and service.
-
11B-227.1 General
Where provided, check-out aisles, sales counters, service counters, food service lines, queues, and waiting lines shall comply with Sections 11B-227 and 11B-904....
-
11B-227.1 General
Where provided, check-out aisles, sales counters, service counters, food service lines, queues, and waiting lines shall comply with Sections 11B-227 and 11B-904....
-
1133A.4.1, Item 1
Sinks and work surfaces required by Section 1133A.4 shall be designed to enable repositioning to a minimum height of 28 inches (711 mm)....
-
1133A.4.1, Item 1
Sinks and work surfaces required by Section 1133A.4 shall be designed to enable repositioning to a minimum height of 28 inches (711 mm)....
-
5.1.3 Transfer Surface Low Height
5.1.3 Transfer Surface Low Height. No agreement on final low height...
-
High work surface
A colleague of mine who is a wheelchair user shared this photo with me of a seating area in a hotel lobby where free wi-fi is offered. All of the seating spaces/work surfaces were...
-
GPK Modular QuadDesk
In addition, while a conventional desk with a fixed height of 26" to 29" would force you into uncomfortable and ergonomically unsafe postures and positions, the QuadDesk's height can be...
