Pedestal and water distribution head shall be constructed of heavy gauge, type 304 stainless steel....
Search Results "Water Spout"
Commonly Searched Documents
- Willoughby Industries WWF-4206 Six Station Full Round 42" Stainless Steel Deep Bowl Washfountain
 - Willoughby Industries WAF-3606 AquaFount® Six Station Full Round 36" Solid Surface Deep Bowl Washfountain
 - ELKAY Filtered EZH2O® Bottle Filling Station with SwirlFlo® Green Bi-Level Refrigerated Fountain LZWS-SFGRN28K
 - Just Manufacturing Commercial Deck Mounted Single Control Lavatory Faucet
 - 
    
  
  Results comparison with current accessibility guidelines
  
The height of a horizontal grab bar (parallel to the floor) is to be between 33”-36” (83.8 and 91.4cm) for water stalls, water closets, bathtubs, and bathrooms....
 - 
    
  
  11B-1003.3.2 Boarding pier clearances
  
At high water, the entire chain is floating and a transition plate connects the first float to the surface of the launch ramp....
 - 
    
  
  604.7 Dispensers
  
Toilet paper dispensers shall comply with 309.4 and shall be 7 inches (180 mm) minimum and 9 inches (230 mm) maximum in front of the water closet measured to the centerline of the dispenser...
 - 
    
  
  Baby Changing Tables
  
Certain elements are permitted to overlap space at water closets, such as grab bars, paper dispensers, and coat hooks (604.3.2)....
 - 
    
  
  Play Tables
  
This includes tables designed for sand and water play, gathering areas, and other activities....
 - 
    
  
  604.5 Grab Bars (Exception 2)
  
604.5 Grab Bars (Exception 2) Exception 2 to this section permits grab bars to not be installed at water closets in residential dwelling units required to provide mobility features provided...
 - 
    
  
  711.3.1 Through penetrations
  
and hot gases sufficient to ignite cotton waste where subjected to ASTM E 119 time temperature fire conditions under a minimum positive pressure differential of 0.01 inch (2.49 Pa) of water...
 - 
    
  
  15. Can I store my lift and bring it out only when it is requested by a person with a disability?
  
In addition, the ADA Standards specify that a lift must be located at the proper water depth and with the necessary space around it to maneuver a wheelchair....
 - 
    
  
  Openings in Trail Surfaces
  
This deviation allows the use of boardwalk decking that needs more than ½-inch (13-millimeter) -wide spacing between the planks to permit expansion and to allow water to drain....
 - 
    
  
  Bathrooms
  
Bathrooms Accessible bathrooms must provide an accessible water closet, accessible lavatory, and accessible shower or tub....
 - 
    
  
  Calculation of Percentages 
  
For example, for the location of wheelchair accessible water closets (16” – 18” centerline from side walls or partitions), specifying to the midpoint of the range (17”) will accommodate...
 - Rebuilding Together Petaluma - Petaluma, CA
 - Willoughby Industries WWF-5406/5408 AquaFount® Six and Eight Station Full Round 54" Solid Surface Deep Bowl Washfountain
 - Elkay Filtered EZH2O® Bottle Filling Station Retro Fit Kit LMABFWS-RF
 - Speakman Versatile ADA Handheld Shower System SM-5490-ADA
 - Spectrum Aquatics Aspen Pool Lift
 - 
    
  
  Swimming Pools: ADA Standard Section 242.2
  
Section 242.2 covers scoping requirements in the current ADA Standards for swimming pools.
 - 
    
  
  11B-1003.2.1 Boat slips
  
The vertical distance is 10 feet (3050 mm) between the elevation where the gangway departs the landside connection and the elevation of the pier surface at the lowest water level....
 - 
    
  
  11B-1003.3.2 Boarding pier clearances
  
At high water, the entire chain is floating and a transition plate connects the first float to the surface of the launch ramp....
 - 
    
  
  1003.3.2 Boarding Pier Clearances
  
At high water, the entire chain is floating and a transition plate connects the first float to the surface of the launch ramp....