5.4 Transfer Supports.
Search Results "Stadium-Style Seating"
Commonly Searched Documents
-
5.4 Transfer Supports
-
5.4 Transfer Supports Recommendations
5.4 Transfer Supports Recommendations
-
M305.2 Transfer Supports
Transfer supports shall comply with M305.2.
- Salsbury Industries Designer Wood Locker Double Tier 'S' Style 1 Wide
- Salsbury Industries Designer Wood Locker Double Tier 'S' Style 3 Wide
-
§ 35.138(h) Prevention of fraud in purchase of tickets for accessible seating
(h) Prevention of fraud in purchase of tickets for accessible seating....
-
Does a wheelchair user have to use the seat belt and shoulder harness?
Transit operators may establish a policy that requires the seat belt and shoulder harness to be used by all riders, including those who use wheelchairs as well as those who use vehicle seats...
-
Wheelchair seating locations must be provided in all areas
• Wheelchair seating locations must be provided in all areas including sky boxes and specialty areas....
- Murdock Manufacturing Waterless Toilet Riser with Seat and Cover
-
§ 35.138(h) Prevention of fraudulent purchase of accessible seating
(h) Prevention of fraudulent purchase of accessible seating. A public entity may not require proof of disability before selling a wheelchair space....
-
M305.2.2.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M305.2.2.1 shall be 15 inches (380 mm) long minimum. Transfer supports shall be positioned along 13 ½ inches...
-
M305.2.4.1 Circular Cross Section
Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
M305.2.1.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be capable of supporting transfer on each side of the transfer surface.
-
M305.2.1.1 End Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.1 and M302.2 shall be located on the short side (length) opposite the transfer side.
-
M305.2.2.2 Side Transfer Supports
Transfer supports for transfer surfaces complying with M301.2.3.2 shall be 28 inches (710 mm) long minimum and shall be positioned along the width of transfer...
-
Requirement 6 -- Reinforced Walls for Grab Bars
[See subsections ...]
- KirbyBuilt Providence Picnic Table with Maximum Seating
-
Captioning at sporting venues. (Section-by-Section Analysis)
The Department asked whether requiring captioning of safety and emergency information made over the public address system in stadiums seating fewer than 25,000 would create an undue burden...
-
Captioning at sporting venues. (Section-by-Section Analysis)
The Department asked whether requiring captioning of safety and emergency information made over the public address system in stadiums seating fewer than 25,000 would create an undue burden...
-
1.18 Wheelchair space, wheelchair location, or wheelchair seating
1.18 "Wheelchair space," "wheelchair location," or "wheelchair seating" shall mean and refer to a designated space in an auditorium where a person who uses a wheelchair or motorized scooter...
-
Section 35.151(g) Assembly areas
The NPRM proposed at Sec. 35.151(g)(1) to require wheelchair spaces and companion seating locations to be dispersed to all levels of the facility and are served by an accessible route....
-
M305.2.4.2 Non-Circular Cross Section
Transfer supports with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8...
-
5.1.3 Transfer Surface Low Height Options for M301 and M302
5.1.3 Transfer Surface Low Height Options for M301 and M302 The Committee did not agree on a final low height recommendation. Rationale for final recommendation (more detail...
-
5.4.8 Transfer Support Gripping Surface Hazard Recommendation for M301 and M302
5.4.8 Transfer Support Gripping Surface Hazard Recommendation for M301 and M302 Description: Gripping surface hazards are sharp or abrasive elements that prevent an individual...