Each car shall be equipped with a self-leveling feature that will automatically bring and maintain the car at floor landings within a tolerance of 1/2 inch (13 mm) under rated...
Search Results "Elevator Signal Timing"
-
407.4.4 Leveling
-
1008.3.2.2 Height
1008.3.2.2 Height. Each transfer step shall be 8 inches (205 mm) high maximum.
-
1008.3.2.2 Height
Each transfer step shall be 8 inches (205 mm) high maximum.
-
1008.3.2.1 Size
Transfer steps shall have level surfaces 14 inches (355 mm) deep minimum and 24 inches (610 mm) wide minimum.
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface.
-
1008.3.1.1 Size
Transfer platforms shall have level surfaces 14 inches (355 mm) deep minimum and 24 inches (610 mm) wide minimum.
-
409.4.7 Emergency Communications
Emergency two-way communication systems shall comply with 409.4.7.
-
409.4.7 Emergency Communications
409.4.7 Emergency Communications. Emergency two-way communication systems shall comply with 409.4.7.
-
407.2.1.6 Keypads
Where keypads are provided, keypads shall be in a standard telephone keypad arrangement and shall comply with 407.4.7.2.
-
1008.3.1.1 Size
1008.3.1.1 Size. Transfer platforms shall have level surfaces 14 inches (355 mm) deep minimum and 24 inches (610 mm) wide minimum.
-
407.4.7.1.1 Type
407.4.7.1.1 Type. Control buttons shall be identified by tactile characters complying with 703.2.
-
407.2.1.6 Keypads
407.2.1.6 Keypads. Where keypads are provided, keypads shall be in a standard telephone keypad arrangement and shall comply with 407.4.7.2.
-
1008.3.1.2 Height
1008.3.1.2 Height. The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor...
-
Car Controls [4.10.12]
lights beside buttons are permitted but cannot interfere with the placement of raised and Braille characters) emergency controls are not required by ADAAG but are addressed by the elevator...
-
11B-411.2.1.5 Button requirements
Keypad buttons, the accessibility function button, and additional hall call console buttons shall comply with Section 11B-411.2.1.5.
-
11B-411.2.1.5 Button requirements
Keypad buttons, the accessibility function button, and additional hall call console buttons shall comply with Section 11B-411.2.1.5.
-
11B-411.2.1.5 Button requirements
Keypad buttons, the accessibility function button, and additional hall call console buttons shall comply with Section 11B-411.2.1.5.
-
1. Background
., RJ-11 connector), a microphone capable of being turned on and off to allow a user to intermix speech and TTY use, and support for cross-manufacturer, non-proprietary standard TTY signal...
-
12.1 Q...How is the individual building test performed for additional stories, to determine if those stories must also be treated as ground floors?
For purposes of determining whether a non-elevator building has more than one ground floor, the point of measurement for additional ground floors, after the first ground floor has been established...
-
408.4.4 Leveling
Elevator car leveling shall comply with 407.4.4....
-
408.4.4 Leveling
Elevator car leveling shall comply with 407.4.4....
-
11B-233.3.1.2.6.5 Additional requirements.
Door signal devices complying with Section 11B-809.8.1. 5. Door maneuvering clearance complying with Section 11B-809.8. 6....
-
408.4.2 Floor Surfaces
Floor surfaces in elevator cars shall comply with 302 and 303....