The floor surface of the companion seat shall be at the same elevation as the floor surface of the wheelchair space....
Search Results "Curb Ramp Surface"
-
11B-802.3.1 Alignment
-
Alignment: ADA Standard Section 802.3.1
The floor surface of the companion seat shall be at the same elevation as the floor surface of the wheelchair space....
-
11B-802.3.1 Alignment
The floor surface of the companion seat shall be at the same elevation as the floor surface of the wheelchair space....
-
Miracle Sealant Company 511 Anti-Slip Formula
Tile • Grout • Porcelain Tile • Slate 511 Anti-Slip Formula is a penetrating sealer designed for the anti-slip protection of all tile and stone surfaces...
-
§ 38.159(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp shall have barriers at least 2 inches (50 mm) high to prevent mobility aid wheels from slipping off....
-
§ 38.83(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
§ 38.125(c)(5) Slope
Ramps or bridge plates shall have the least slope practicable....
-
T402.12 Stowage
Where portable ramps and bridgeplates are permitted, a compartment, securement system, or other storage method shall be provided within the non-rail vehicle to stow such ramps and bridgeplates...
-
B. Slopes
Slopes - Examine each of the interior routes described above: ...excluding accessible ramps, do the corridors have running slopes (i.e.: in the direction of travel) not more than 1:20...
-
904.3.3 Check Writing Surfaces
Where provided, check writing surfaces shall comply with 902.3....
-
904.3.3 Check Writing Surfaces
Where provided, check writing surfaces shall comply with 902.3....
-
A Longitudinal Study of Playground Surfaces to Evaluate Accessibility - Final Report
A LONGITUDINAL STUDY OF PLAYGROUND SURFACES TO EVALUATE ACCESSIBILITY Final Report October 2013 Staff Liaison Peggy Greenwell U.S....
-
Accessible Surfaces Located In The Use Zone
Accessible Surfaces Located In The Use Zone If located within the use zone, accessible ground surfaces must also be impact attenuating and meet ASTM F 1292-04 Standard Specification for...
-
Methods for Placing a Slope Tool on the Surface
There are several methods that can be used for measuring slopes and cross slopes with a digital slope meter. Each method has advantages and disadvantages.
-
Surface: ADA Standard Section 1009.5.5
The surface of the transfer system shall not be sharp and shall have rounded edges....
-
Surface: ADA Standard Section 1009.4.4
Surfaces of transfer walls shall not be sharp and shall have rounded edges....
-
Landings [§405.7]
Intermediate landings between runs must be at least 60” wide clear and 60” long clear where ramps change direction (any change from linear)....
-
GameTime ADA Wide Ramp Attachment 3D
without mobility devices Benefits Adds an accessible method of entry/exit to and from the play structure Includes a threshold for smooth transitions on and off the ramp...
-
§ 38.159(c)(6) Attachment
When in use for boarding or alighting, the ramp shall be firmly attached to the vehicle so that it is not subject to displacement when loading or unloading a heavy power mobility aid and...
-
§ 38.23(c)(3) Ramp threshold
(3) Ramp threshold. The transition from roadway or sidewalk and the transition from vehicle floor to the ramp may be vertical without edge treatment up to 1/4 inch....
-
EZ-ACCESS Transitions® Angled Entry Plate
Transitions® Angled Entry Plate – A portable stand-alone threshold plate with a slip-resistant surface which offers superior traction in varying conditions....
-
11B-1003.2.2 Boarding piers at boat launch ramps
Accessible routes serving boarding piers at boat launch ramps shall be permitted to use the exceptions in Section 11B-1003.2.2....
-
11B-608.7 Thresholds
Thresholds in roll-in type shower compartments shall be ½ inch (12.7 mm) high maximum in accordance with Section 11B-303. [2010 ADAS] 608.7 Thresholds. Thresholds in roll-in type...
-
11B-608.7 Thresholds
11B-608.7 Thresholds. Thresholds in roll-in type shower compartments shall be ½ inch (12.7 mm) high maximum in accordance with Section 11B-303. [2010 ADAS] 608.7 Thresholds....
