Unless more hard of hearing people can be convinced (or their hearing aid dispensers) to include telecoils in their hearing aids, this situation is unlikely to change....
Search Results "Mobility Aid Seating Location"
-
4.2 Functional Comparisons
-
806.1 General
Guest rooms required to provide mobility features shall comply with 806.2. Guest rooms required to provide communication features shall comply with 806.3....
-
ClickAndGo Navigation Wayfinding Technology
Customized Narrative Walking Directions ClickAndGo Navigation is a patented wayfinding technology for blind, low-vision and mobility-challenged pedestrians....
-
11B-232.2.1 Cells with mobility features
At least 3 percent, but no fewer than one, of the total number of cells in a facility shall provide mobility features complying with Section 11B-807.2....
-
11B-232.2.1 Cells with mobility features
At least 3 percent, but no fewer than one, of the total number of cells in a facility shall provide mobility features complying with Section 11B-807.2....
-
Transient Lodging Facilities: ADA Standard Section 206.5.3
Section 206.5.3 covers scoping requirements in the most current ADA Standards for accessible routes to transient lodging facilities.
-
3.0 Comparison of Research Methodologies
Three-dimensional locations of body and wheelchair landmarks were collected with an electromechanical probe (Feathers, Paquet and Steinfeld, 2004)....
-
§382.121 What mobility aids and other assistive devices may passengers with a disability bring into the aircraft cabin?
[See subsections ...]
-
3.Guidelines for Compatibility With Peripheral Devices
be compatible with peripheral devices commonly used by individuals with disabilities to achieve accessibility, and should comply with the following provisions, as applicable: Hearing aid...
-
11B-221.2 Wheelchair spaces
Removes operational guidance on the use of removable seats when wheelchair spaces are not occupied by individuals in wheelchairs....
-
Figure 703.4.2 Location of Tactile Signs at Doors – Drawing from the U.S. Access Board
-
4.1.3(18)
(18) If fixed or built-in seating or tables (including, but not limited to, study carrels and student laboratory stations), are provided in accessible public or common use areas, at least...
-
Estimote Sticker Beacons - Introducing Nearables
Estimote Beacons and Stickers are small wireless sensors that you can attach to any location or object....
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall....
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall....
-
410.3 Magnetic Coupling
delivers output by an audio transducer that is typically held up to the ear, ICT shall provide a means for effective magnetic wireless coupling to hearing technologies, such as hearing aids...
-
4. Ticketing
The rule provides guidance on the sale of tickets for accessible seating, the sale of season tickets, the hold and release of accessible seating to persons other than those who need accessible...
-
4. Ticketing
The rule provides guidance on the sale of tickets for accessible seating, the sale of season tickets, the hold and release of accessible seating to persons other that those who need accessible...
-
4.1.2(17)
(17) If fixed or built-in seating, tables, or work surfaces are provided in accessible spaces, at least 5 percent, but always at least one, of seating spaces, tables, or work surfaces shall...
-
Assessment Factors
Assessment Factors In deciding whether a particular type of OPDMD can be accommodated in a particular facility, the following factors must be considered: the type, size,...
-
3.3.3 Clear Floor Width
3.3.3 Clear Floor Width The findings on clear floor width are based on the findings on occupied width from anthropometric studies shown in Figure 3‒3. Neither the DfT or DETR...
-
3.3.4 Clear Floor Length
3.3.4 Clear Floor Length The mean value of clear floor length for our study (1250 mm or 49 in.) is above the clear floor length provided in the U.S. standards (1220 mm or 48...
-
604.5.1 Side Wall
The side wall grab bar shall be 42 inches (1065 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1370 mm) minimum from the rear wall. ...
-
5. Exception from the Requirements of M302 for Weight Scales with Integral Seats
The primary purpose of the technical requirements for diagnostic equipment used by patients in the seated position is to facilitate independent transfer from a mobility device onto the diagnostic...
