The tolerance for the top surface of a slab - on - ground is ± 3/4 inch (19 mm). The deviation from slope or plane of formed surfaces over 10 feet (3 m) is ± 0.3% of length....
Search Results "Ground Floor Exit"
Filters
Commonly Searched Documents
-
Suggested accessibility guidelines for exterior concrete surfaces
-
6c.
Is there at least a 30-inch by 48-inch clear floor space on the wheelchair lift? Yes _____ No _____...
-
806.2.3 Sleeping Areas
At least one sleeping area shall provide a clear floor space complying with 305 on both sides of a bed....
-
4.23.2 Doors
Doors shall not swing into the floor space required for any fixture....
-
4.23.2 DOORS
Doors shall not swing into the floor space required for any fixture....
-
Viewing Scopes [1011.2, 1011.3, and 1011.8]
At viewing scopes used from a seated position, a minimum of 36 by 48 inches of clear ground space positioned for a forward approach to the viewing scope must be provided....
-
Neo-Metro Urinal Divider Number 8949-N
The Neo-Metro Urinal Divider provides users privacy. The divider is intended for front anchoring. Regularly Furnished: The 16 gage type 304 stainless steel divider includes...
-
11B-609.7 Installation
Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space....
-
609.7 Installation
Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space....
-
609.7 Installation
Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space....
-
f-iii
Is there at least a 30-inch by 48-inch clear floor space on the wheelchair lift? [ADA Standards §§ 4.11.2, 4.2.4] Yes No...
-
609.7 Installation
Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space....
-
§ 38.99(a)
(a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant...
-
11B-609.7 Installation
Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space....
-
SlabGasket Expansion Joint Replacement
Demonstration of Slabgasket Expansion Joint Replacement
-
What is an Expansion Joint Test Kit
Requires the Registered User plan or above. Login!
-
Repairing Expansion Joints - GapArmour Basics
Requires the Registered User plan or above. Login!
-
NanoPave® 2-in-1 Joint Stabilizer and Sealer
This is a video demonstration for the NanoPave JSS (NP-JSS) - a revolutionary 2-in-1 joint stabilizer and sealer product for use with pavers, natural stone, and flagstone. NP-JSS...
-
Filling expansion joints by GapArmour.com
Requires the Registered User plan or above. Login!
-
4.30.6 Mounting Location and Height
Mounting height shall be 60 in (1525 mm) above the finish floor to the centerline of the sign....
-
609.7 Installation
Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space....
-
Den
Pull-out keyboard and utility tray for seated users unable to use a laptop Non-slip oil finish on floor FSC certified maple floor in the den and dining room....
-
11B-609.7 Installation
Grab bars shall be installed in any manner that provides a gripping surface at the specified locations and that does not obstruct the required clear floor space....
-
Car Controls [4.10.12]
Control panels must be located so that no floor button is higher than 54 inches for a side reach and 48 inches for a front approach....
