The commenter explained that the gantry of a mammography machine includes a base lip which is required for structural and seismic stability, and protrudes into the knee and toe clearance...
Search Results "Drive-Up Fare Machine"
Commonly Searched Documents
-
b. Exception for Base Support Allowance and Unobstructed Knee and Toe Space
-
7.2 Technological and Scientific Considerations
As described in Section 4.3.2, some types of current diagnostic imaging equipment present serious technical, scientific, and design impediments to improve accessibility of the height of machines...
-
ADA Compliance Motivators & Strategies
Years later, this same employee continued to show up faithfully every day to do her job....
-
(1) Adjustability: Minimum High Transfer Height
For manual wheelchair user’s seats measured up to 23.9 inches; for power wheelchair users up to 28.9 inches; and for scooter users to 25.3 inches....
-
New Requirements for Assistive Listening Systems (ALS)
Always round up....
-
4.1.3 Adjustable Height Chairs with and without Footplates
Figure 4.1 shows the chair when configured in an upright seated position; these same patient support surfaces (made up of the back, seat, and leg rests) are repositioned horizontally to...
-
Exam Tables and Chairs
Some will be able to transfer on their own by standing up from a mobility device, pivoting, and sitting down on the exam table....
-
Prohibition of Discriminatory Practices
Air carriers may require up to 48 hours’ advance notice for certain accommodations that require preparation time (e.g., respirator hook-up, transportation of an electric wheelchair on an...
-
Wheelchair Turning Space [4.2.3]
The overlap of turning space must be limited to one segment of the T so that back-up maneuvering is not restricted....
-
Station 2-Three-Point Turn
A three-point turn is defined as a maneuver where the user starts at one edge of the shared use path, makes a forward turn toward the other side of the path, backs up while turning the device...
-
1013.4 Raised character and braille exit signs
stairway or ramp shall be identified by a tactile exit sign with the following words as appropriate: 2.1 “EXIT STAIR DOWN” 2.2 “EXIT RAMP DOWN” 2.3 “EXIT STAIR UP...
- Willoughby Industries ASUW-1314-HEU-BS Contoured High Efficiency Ligature-Resistant Urinal
- Viking K-1600-EHFA Elevator Phone with Built-in Dialer and Digital Announcer
-
11B-1009.5.4 Transfer steps
Where possible, the height of the transfer step should be minimized to decrease the distance an individual is required to lift up or move down to reach the next step to gain access....
-
What are the time limits for filing charges of discrimination?
there is a state or local fair employment practices agency that enforces a law prohibiting the same alleged discriminatory practice, it is possible that charges may be filed with EEOC up...
-
211.3 More Than Minimum Number
EXCEPTION: Where 50 percent of the drinking fountains yields a fraction, 50 percent shall be permitted to be rounded up or down provided that the total number of drinking fountains complying...
-
1009.5.4 Transfer Steps
Where possible, the height of the transfer step should be minimized to decrease the distance an individual is required to lift up or move down to reach the next step to gain access....
-
Islands [4.7.11]
If there is no level space between ramps, wheelchairs can "bottom out" or "high center" while proceeding down one ramp while the back wheels are coming up the other slope....
-
Chapter 10: Recreation Facilities
The final rule adds technical requirements to Chapter 10 for outdoor constructed features (1011); parking spaces within camping units and picnic units and pull-up spaces at dump stations...
-
Controls [§404.3.5]
Recommendation: Placing controls in locations that preclude backing-up will facilitate usability....
-
Curb Ramps [§406]
Curb Ramps [§406] Requirements for curb ramps apply to ramps that cut through curbs or are built up to them....
-
Stairway Handrails Requirements in the ADA Standards (§504)
Protrusions up to 12” are specified for objects mounted on posts or pylons (§307)....
-
Can handrails or other elements overlap door maneuvering clearances?
However, door maneuvering clearances can be offset up to 8” from the face of the door or gate to accommodate wall thickness, casework, shelves, or other elements adjacent to doorways, including...
-
Can handrails overlap door maneuvering clearances?
However, door maneuvering clearances can be offset up to 8” from the face of the door or gate to accommodate wall thickness, casework, shelves, or other elements adjacent to doorways, including...