A. The Guidelines do not prescribe the type of product for grab bars, or the structural strength for grab bars. The Guidelines only state that the necessary reinforcement must be...
Search Results "Transfer Shower"
Commonly Searched Documents
- 
    
  
  24.1 Q. What types of grab bars should the reinforcement be designed to accommodate and what types may be used if the builder elects to install grab bars in some units at the time of construction?
  
 - 
    
  
  205.1 General
  
205.1 General. Operable parts on accessible elements, accessible routes, and in accessible rooms and spaces shall comply with 309. EXCEPTIONS: 1. Operable parts that are intended...
 - 
    
  
  11B-205.1 General
  
Operable parts on accessible elements, accessible routes, and in accessible rooms and spaces shall comply with Section 11B-309. Exceptions: 1. Operable parts that are intended...
 - 
    
  
  H. Restrooms and Showers
  
Restrooms and Showers At least one set of toilet rooms serving the shelter must be accessible to individuals who use a wheelchair, scooter, or other mobility device....
 - 
    
  
  M305.2.4.1 Circular Cross Section
  
Transfer supports with circular cross sections shall have an outside diameter of 1 ¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
 - 
    
  
  M305.1 General
  
Supports shall comply with M305.
 - 
    
  
  M305.1 General (Section-by-Section Analysis)
  
This is an introductory section.
 - 
    
  
  M305.1 General
  
Supports shall comply with M305, as applicable.
 - Acess-Able Designs Portable Tub/Shower Transfer Bench SH-425
 - 
    
  
  WMD POSITIONS FOR TRANSFER
  
WMD POSITIONS FOR TRANSFER The design of the corner radii allows closest possible position for wheelchair transfers, minimizing potential gaps and improving the patient’s ability to transfer...
 - 
    
  
  213 Toilet Facilities and Bathing Facilities
  
Unisex bathing rooms shall contain one shower or one shower and one bathtub, one lavatory, and one water closet....
 - 
    
  
  M305.2.4.2 Non-Circular Cross Section
  
Transfer supports with non-circular cross sections shall have a cross-section dimension of 2 inches (51 mm) maximum and a perimeter dimension of 4 inches (100 mm) minimum and 4.8 inches...
 - Center on Knowledge Translation for Technology Transfer (KT4TT)
 - 
    
  
  Comparison of Transfer Protocols
  
A comparison of the 5th, 25th, 50th, 75th and 95th percentiles between the first transfer study and this study are shown in Tables D6 and D7....
 - 
    
  
  1607.9 Loads on handrails, guards, grab bars, shower seats, dressing room bench and seats
  
1607.9 Loads on handrails, guards, grab bars, shower seats, dressing room bench and seats....
 - 
    
  
  Exam Tables and Chairs
  
Individuals transfer to and from adjustable-height exam tables and chairs differently....
 - 
    
  
  Questionnaire on Two Step Transfers
  
All subjects completed a questionnaire to describe their impressions about performing the two step transfers or to explain the reasons why they did not attempt these transfers. ...
 - 
    
  
  Handrails, Grab Bars, and Tub and Shower Seats [4.26]
  
Handrails, Grab Bars, and Tub and Shower Seats [4.26] ADAAG 4.26 provides technical requirements for: handrails at ramps [4.8] and stairs [4.9] grab bars at water closets...
 - 
    
  
  3. Seat Transfer
  
Is there a transfer tub seat (that can be securely attached to the tub) available for persons who may not be able to stand in the tub to bathe?...
 - 
    
  
  4. Bed transfer space
  
Bed transfer space: A 30-inch by 48-inch clear floor space facilitates transfer from a wheelchair to the bed....
 - 
    
  
  J. Transfer Space
  
If there is a lavatory in the accessible stall, is there 42" between the center of the toilet and the near edge of the adjacent lavatory to permit persons with disabilities to transfer onto...
 - Irwin Seating Company ADA Transfer Arm
 - The Association of Safe Patient Handling Professionals
 - 
    
  
  Design Criteria for the Transfer Station
  
A custom-built modular transfer station was designed and fabricated to meet the study goals....