(2) By documenting that, when there is more than one source of intercity or commuter rail cars for a lease of seven days or less, the lessee has obtained all available accessible intercity...
Search Results "Rail Vehicle"
-
§ 37.87(d)(2)
-
§ 37.121(c)
(c) Requirements for complementary paratransit do not apply to commuter bus, commuter rail, or intercity rail systems....
-
Clear Floor or Ground Space
Clear Floor or Ground Space At least one clear floor or ground space (30 inches by 48 inches minimum) must be provided at each location that has a railing height of 34 inches maximum....
-
12184(b)(7)
(7) the remanufacture by such entity of a rail passenger car that is to be used to provide specified public transportation so as to extend its usable life for 10 years or more, or the purchase...
-
§ 37.123(e)(2)(iii)
(iii) With respect to rail systems, an individual is eligible under this paragraph if the individual could use an accessible rail system, but—...
-
U.S. Department of Transportation, Federal Transit Administration, Office of Civil Rights
Public transportation includes buses, subways, light rail, commuter rail, monorail, passenger ferry boats, trolleys, inclined railways, and people movers....
-
11B-403.6 Handrails
Handrails provided in elevator cabs and platform lifts, referred to as support rails in the California Building Code, are not required to comply with the requirements for handrails on walking...
-
11B-403.6 Handrails
Handrails provided in elevator cabs and platform lifts, referred to as support rails in the California Building Code, are not required to comply with the requirements for handrails on walking...
-
ICC/IBC: ADA Standard Section 105.2.4
Section 105.2.4 of the ADA Standards cover references to the International Code Council (ICC) and the International Building Code (IBC).
-
Rockwood Manufacturing Company 702 Handrail Bracket
Specifications: Material: Cast Brass FASTENER: Wood Rail: 3 ea. #12 x 2 FH WS; 2 ea. #8 x 3/4 OH SMS Metal Rail: 3 ea. #12 x 2 FH WS; 2 ea. 8-32 x 3/4 OH SMS Ordering: Specify...
-
§ 37.42(d)(3)
(3) Before proceeding with constructing or modifying a station platform covered by paragraphs (c) and (d) of this section, the railroad must obtain approval from the FTA (for commuter rail...
-
§ 37.42(d)(3)
(3) Before proceeding with constructing or modifying a station platform covered by paragraphs (c) and (d) of this section, the railroad must obtain approval from the FTA (for commuter rail...
-
Overview of Proposed Guidelines
signals; Pedestrian signals, including requirements for accessible pedestrian signals and pedestrian pushbuttons; Transit stops and transit shelters for buses and light rail...
-
Transition Plans
Terminology Tip Why wheelchairs are not motor vehicles....
-
11B-228 Depositories, vending machines, change machines, mail boxes, fuel dispensers, and electric vehicle charging stations.
[2010 ADA Standards] 228 Depositories, Vending Machines, Change Machines, Mail Boxes, and Fuel Dispensers
-
11B-228 Depositories, vending machines, change machines, mail boxes, fuel dispensers, and electric vehicle charging stations.
[2010 ADA Standards] 228 Depositories, Vending Machines, Change Machines, Mail Boxes, and Fuel Dispensers
-
Accessible Fishing Piers and Platforms
Sections 237 and 1005 of the 2010 Standards require at least twenty-five percent (25%) of railings, guards, or handrails (if provided) to be at a 34-inch maximum height (so that a person...
-
106.5.34 Key Station
Rapid and light rail stations, and commuter rail stations, as defined under criteria established by the Department of Transportation in 49 CFR 37.47 and 49 CFR 37.51, respectively....
-
10.3.1(13)
(13) Where it is necessary to cross tracks to reach boarding platforms, the route surface shall be level and flush with the rail top at the outer edge and between rails, except for a maximum...
-
1005.3 Edge Protection
Where railings, guards, or handrails complying with 1005.2 are provided, edge protection complying with 1005.3.1 or 1005.3.2 shall be provided. Advisory 1005.3 Edge Protection....
-
1005.3 Edge Protection
Where railings, guards, or handrails complying with 1005.2 are provided, edge protection complying with 1005.3.1 or 1005.3.2 shall be provided. Advisory 1005.3 Edge Protection....
-
1005.3 Edge Protection
Where railings, guards, or handrails complying with 1005.2 are provided, edge protection complying with 1005.3.1 or 1005.3.2 shall be provided. Advisory 1005.3 Edge Protection....
-
R302.7.4 Flangeway Gaps
Flangeway gaps at pedestrian at-grade rail crossings shall be 64 mm (2.5 in) maximum on non-freight rail track and 75 mm (3 in) maximum on freight rail track....
-
§301(8)
Rail and railroad. The terms "rail" and "railroad" have the meaning given the term "railroad" in section 202(e) of the Federal Railroad Safety Act of 1970 (45 U.S.C. 431(e))....
