• Circular turning space in room (section 603.2.1); • Required clear floor spaces at fixtures and turning space overlap (section 603.2.2); • Turning space includes knee and toe clearance...
Search Results "Kitchen Clearance"
-
Plan 3B: 12-Foot Wide Accessible Guest Room
-
Plan 2A: 13-Foot Wide Accessible Guest Room
• Circular turning space in room (section 603.2.1); • Required clear floor spaces at fixtures and turning space overlap (section 603.2.2); • Turning space includes knee and toe clearance...
-
11B-602.2 Clear floor space
Knee and toe clearance complying with Section 11B-306 shall be provided....
-
Plan 4A: 13-Foot Wide Accessible Guest Room
• Circular turning space in room (section 603.2.1); • Required clear floor spaces at fixtures and turning space overlap (section 603.2.2); • Turning space includes knee and toe clearance...
-
Single-User Toilet Rooms: Side Transfer Space
Doors must comply with 4.13, which specifies maneuvering clearances. The location of doors is based on their size and sweep....
-
§100.205(c)
(c) All covered multifamily dwellings for first occupancy after March 13, 1991 with a building entrance on an accessible route shall be designed and constructed in such a manner that—
-
11B-608.2.2.1 Clearance
A 36 inch (914 mm) wide minimum by 60 inch (1524 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
-
11B-608.2.2.1 Clearance
A 36 inch (914 mm) wide minimum by 60 inch (1524 mm) long minimum clearance shall be provided adjacent to the open face of the shower compartment....
-
Hot water heaters and knee clearance
If the hot water has sharp or abrasive edges or if the piping serving the hot water heater falls within the required knee clearance.............
-
T208 Passenger Access Routes
[See subsections ...]
-
Grab Bars
Grab bars are usually provided in buildings to provide stability and allow people to use their arms to assist in movement over short distances. The most common location for grab bars...
-
§ 38.83(c)(8) Handrails
(8) Handrails. If provided, handrails shall allow persons with disabilities to grasp them from outside the vehicle while starting to board, and to continue to use them throughout the...
-
NAADAC Webinar Series: "ADA: The Next Generation" - Virtual and At-Home Training
Building Blocks (11/3/10), Run time: 1.5 hrs ADA Standards – Common Space & Element Types, Communications (11/10/10), Run time:1.5 hrs ADA Standards – Toilets, Bathing, Kitchens...
-
609.3 Grab Bar Vertical Clearance
-
Plan 5A: 13-Foot Wide Accessible Guest Room
following accessible features are provided in the bathroom: • Comparable vanity counter top space (section 806); • Transfer shower (section 603.2); • Shower seat (section 610.3); • Clearance...
-
11B-205.1 General
Where two or more outlets are provided in a kitchen above a length of counter top that is uninterrupted by a sink or appliance, one outlet shall not be required to comply with 309....
-
§ 35.151(f) Housing at a place of education
(f) Housing at a place of education. Dormitories or residence halls operated by or on behalf of places of education that are subject to the proposed standards shall comply with the...
-
§ 35.151(f) Housing at a place of education.
(f) Housing at a place of education. Housing at a place of education that is subject to this section shall comply with the provisions of the 2010 Standards applicable to transient...
-
11B-609.3 Spacing
The grab bar clearance of 1½ inches required in this section is a safety clearance to prevent injuries resulting from arms slipping through the openings....
-
11B-609.3 Spacing
The grab bar clearance of 1½ inches required in this section is a safety clearance to prevent injuries resulting from arms slipping through the openings....
-
11B-609.3 Spacing
The grab bar clearance of 1½ inches required in this section is a safety clearance to prevent injuries resulting from arms slipping through the openings....
-
Plan 2B: 13-Foot Wide Accessible Guest Room
• Circular turning space in room (section 603.2.1); • Required clear floor spaces at fixtures and turning space overlap (section 603.2.2); • Turning space includes knee and toe clearance...
