Grab bars and any wall or other surfaces adjacent to grab bars shall be free of sharp or abrasive elements and shall have rounded edges....
Search Results "AHJ: Authority Having Jurisdiction"
Commonly Searched Documents
-
11B-609.5 Surface hazards
-
11B-1008.3.2.1 Size
Transfer steps shall have level surfaces 14 inches (356 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
11B-1008.3.1.1 Size
Transfer platforms shall have level surfaces 14 inches (356 mm) deep minimum and 24 inches (610 mm) wide minimum....
-
11B-804.6.5.1 Side-hinged door ovens
Side-hinged door ovens shall have the work surface required by Section 11B-804.3 positioned adjacent to the latch side of the oven door....
-
11B-411.4.6.2 Buttons
The car shall not have non-functional, exposed floor buttons....
-
STRUCTURAL FRAME
[DSA-AC] The columns and the girders, beams and trusses having direct connections to the columns and all other members that are essential to the stability of the building or facility as...
-
TITLE III COVERAGE
The United States is authorized to investigate alleged violations of title III of the ADA and to bring a civil action in federal court in any case that involves a pattern or practice of...
-
§104.3(k) Program or activity
(Authority: 29 U.S.C. 794(b))...
-
1. Public Rights-of-Way
In addition, the guidelines address shared use paths, which are designed primarily for use by bicyclists, pedestrians and other authorized motorized and non-motorized users for transportation...
-
11B-705.1.1.1 Dome size
Truncated domes in a detectable warning surface shall have a base diameter of 0.9 inch (22.9 mm) minimum and 0.92 inch (23.4 mm) maximum, a top diameter of 0.45 inch (11.4 mm) minimum and...
- Beneficial Designs Public Rights of Way Assessment Process (PROWAP)
-
Circular Cross Section: ADA Standard Section 609.2.1
Section 609.2.1 covers the current ADA Standards for circular grab bar cross sections.
-
11B-812.6.4 Drive-up
Vehicle spaces serving drive-up EVCS shall be 204 inches (5182 mm) wide minimum and shall not be required to have an adjacent access aisle....
-
11B-609.2.1 Circular cross section
Grab bars with circular cross sections shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum....
-
11B-224.8.1 More than 25-bed sleeping rooms
In sleeping rooms with more than 25 beds, a minimum of 5 percent of the beds shall have clear floor space complying with Section 11B-806.2.3....
-
11B-813.2.1.1 Size
Adult changing tables shall have a changing surface of 70 inches (1778 mm) minimum length and 30 inches (762 mm) minimum width....
-
Islands: ADA Standard Section 406.7
Section 406.7 covers the current ADA Standards for islands.
-
6. Advance Check-in Time
The consumers noted that they have other obligations and restrictions on their time and that advance check-in places significant burdens on their time....
-
Chapter 4: Hardware (Section-by-Section Analysis)
Yet, while new to the 255 Guidelines, these proposed hardware rules are generally not expected to have a significant cost impact....
-
Issue 15: Installation Errors Increase Risk
Because the FDW is much shorter than the pedestrian needs for crossing, he cannot be confident of having enough time to cross unless he waits to start until the beginning of the WALK vibration...
-
INTRODUCTION
INTRODUCTION This document presents uniform standards for the design, construction and alteration of buildings so that physically handicapped persons will have ready access to and use...
-
Access to Programs and Services in Existing Facilities
In the years since the ADA took effect, public facilities have become increasingly accessible....
-
Detectable Warnings: ADA Standard Section 810.5.2
Platform boarding edges not protected by platform screens or guards shall have detectable warnings complying with 705 along the full length of the public use area of the platform....
-
Circular Cross Section: ADA Standard Section 505.7.1
Section 505.7.1 covers the current ADA Standards for the circular cross section of handrail gripping surfaces.