Sanitary napkin disposal units, if provided, shall comply with Section 11B-309.4 and shall be wall mounted and located on the sidewall between the rear wall of the toilet and the toilet...
Search Results "Toilet Paper Dispenser"
-
11B-604.7.2 Disposal units
-
11B-604.7.2 Disposal units
Sanitary napkin disposal units, if provided, shall comply with Section 11B-309.4 and shall be wall mounted and located on the sidewall between the rear wall of the toilet and the toilet...
-
11B-703.1.1 Plan review and inspection
Signs as specified in Section 11B-703, or in other sections of this code, when included in the construction of new buildings or facilities, or when included, altered or replaced due...
-
Case: ADA Standard Section 703.5.2
Characters shall be uppercase or lowercase or a combination of both.
-
11B-809.10.4 Sufficient maneuvering space
Where doors swing into the bathrooms or powder rooms required to comply with Section 11B-809.10, a clear maneuvering space of 30 (762 mm) inches by 48 inches (1219 mm) minimum shall...
-
11B-216.2 Designations
Interior and exterior signs identifying permanent rooms and spaces shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5. Where pictograms are provided as...
-
Designations: ADA Standard Section 216.2
Section 216.2 covers scoping requirements in the current ADA Standards for sign designations.
-
11B-703.1.1 Plan review and inspection
Signs as specified in Section 11B-703, or in other sections of this code, when included in the construction of new buildings or facilities, or when included, altered or replaced due...
-
11B-216.2 Designations
Interior and exterior signs identifying permanent rooms and spaces shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and 11B-703.5. Where pictograms are provided as...
-
11B-703.5.2 Case
Characters shall be uppercase or lowercase or a combination of both.
-
11B-703.5.2 Case
Characters shall be uppercase or lowercase or a combination of both.
-
Bobrick TrimLineSeries™ Surface-Mounted Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-370639
13-7/8" W x 28" H. Flat door design with 90° return. Equipped with stainless steel skirt for surface mounting. Push-Button Operation, Less Than 5 Lb of Force, No Grasping, Pinching...
-
Bobrick ClassicSeries® Recessed or Semi-Recessed Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-3706
13-7/8" W x 27-7/8" H. Adjustable beveled flange for fully-recessed installation in 6" deep walls or semi-recessed installation in 4" - 6" deep walls, satin-finish stainless steel....
-
Bobrick TrimLineSeries™ Semi-Recessed Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-370634
13-7/8" W x 28" H. Flat door design with 90° return. Equipped with stainless steel skirt for semi-recessing in 4" (100mm) deep walls. Push-Button Operation, Less Than 5 Lb of Force,...
-
Bobrick ConturaSeries® Semi-Recessed Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-47064
14 3/8" W x 28 3/8" H. Equipped with stainless steel skirt for semi-recessing in 4" (100mm) deep walls. Push-Button Operation, Less Than 5 Lb of Force, No Grasping, Pinching or...
-
Bradley Diplomat Napkin/Tampon Vendor 4A20
NEW! Diplomat Washroom Accessories designed with unique dual-curve geometry No jams, no false feeds Surface or recessed mounting options 7 coin options...
-
Bobrick ClassicSeries® Surface-Mounted Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-2706
11-7/8" W x 25-7/8" H. Adjustable flange surface mounts the unit. Push-Button Operation, Less Than 5 Lb of Force, No Grasping, Pinching or Twisting of the Wrist. Easy access Product...
-
Bobrick ConturaSeries® Recessed Napkin/Tampon Vendor 25₵, 50₵ and Free Operation B-4706
14 3/8" W x 28 3/8" H. Push-Button Operation, Less Than 5 Lb of Force, No Grasping, Pinching or Twisting of the Wrist. Easy access Product tray. Single-coin slots are key to...
-
Sec.36.403(f) Disproportionality
(f) Disproportionality.
-
F216 Signs
[See subsections ...]
-
703.4.1 Height above Finish Floor or Ground
Tactile characters on signs shall be located 48 inches (1220 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest tactile character and 60...
-
11B-703 SIGNS
[See subsections ...]
-
11B-703.4.1 Height above finish floor or ground
Tactile characters on signs shall be located 48 inches (1219 mm) minimum above the finish floor or ground surface, measured from the baseline of the lowest Braille cells and 60...
-
703 Signs
Requirements for signs provide specifications for raised characters (703.2), braille characters (703.3), the height and location of signs with tactile characters (703.4), visual...
