Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
Search Results "Shower Door"
Commonly Searched Documents
-
1132A.9 Smooth surface
-
T502 Doorways
[See subsections ...]
-
§ 38.93 Doorways
[56 FR 45756, Sept. 6, 1991, as amended at 76 FR 57939, Sept. 19, 2011]
-
Toilet Compartment Access
If you look at 604.8.1.2 Doors, it says, "Toilet compartment doors, including door hardware, shall comply with 404 except that if the approach is to the latch side of the compartment...
-
§ 38.113(c) Signals
If doors to the platform close automatically or from a remote location, auditory and visual warning signals shall be provided to alert passengers of closing doors...
- CS Pocket Insert Track Demo
-
9.1.2 Accessible Units, Sleeping Rooms, and Suites
In addition, in hotels, of 50 or more sleeping rooms or suites, additional accessible sleeping rooms or suites that include a roll-in shower shall also be provided in conformance with the...
- Horton Automatics Product Slideshow
- EZConcept – Global Architectural Solutions
- 307.4 Door Opening Vertical Clearance
-
Technical Memorandum TM 2013-10 Clustered Toilet Rooms
Access Board, TAS 213.2, Exception 4 does not apply to multiple single user bathing or shower rooms; therefore, this Exception is applicable only to multiple single user toilet rooms clustered...
-
Minimum Number [9.1.2 and 9.1.3]
Rooms with combination roll-in/transfer showers are required in transient lodging facilities with more than 50 rooms....
-
4.1.6(4)(d)
(d) Doors....
- Access Board: Maneuvering Clearance at Recessed Doors
-
1132A.4, Item 4
Secondary exterior doors onto decks, patios or balcony surfaces constructed of impervious materials (e.g., concrete, brick, flagstone) may have a maximum change in height from the interior...
-
§ 36.304(b)(8)
(8) Widening doors;...
-
Sec.36.304(b)(8)
(8) Widening doors;...
-
1134A.6, Item 5
5. Thresholds. When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units...
-
1134A.6, Item 5
5. Thresholds. When a threshold is used, it shall be a maximum of 2 inches (50.8 mm) in height and have a beveled or sloped angle not exceeding 1 unit vertical in 2 units horizontal...
-
29.1 Q. Is it acceptable to design a bathroom with an in-swinging 2'10 door which can be retrofitted to swing out in order to provide the necessary clear floor space in the bathroom?
Thus, for a bathroom, there must be sufficient maneuvering space and clear floor space so that a person using a wheelchair or other mobility aid can enter and close the door, use the fixtures...
- SafePath: ADA Door Access - What is a Level Landing?
- Figure 610.3.1 Rectangular Shower Seat – Drawing from the U.S. Access Board
-
216.4.1 Exit Doors
216.4.1 Exit Doors. Doors at exit passageways, exit discharge, and exit stairways shall be identified by tactile signs complying with 703.1, 703.2, and 703.5....
- Aurora Doors Sliding Barn Door
