Any openings between the lift platform surface and the raised barriers shall not exceed 5/8 inch wide....
Search Results "Raised Crossing"
-
§ 38.125(b)(7) Platform gaps
-
11B-407.4.6.2.1 Size and shape
Buttons shall have square shoulders, be ¾ inch (19.1 mm) minimum in their smallest dimension and be raised 1/8 inch (3.2 mm) plus or minus 1/32 inch (0.8 mm) above the surrounding surface...
-
Section 36.405 Alterations: Historic Preservation
Because those cross-references to the 1991 Standards are no longer applicable, it is necessary in this final rule to provide new regulatory text....
-
M301.3.1 Transfer Supports (Section-by-Section Analysis)
The only change in the final rule was to update the cross reference to applicable transfer surfaces to accommodate the changes made to transfer surfaces, described above in Section IV.B.1...
-
R304.3.1 Turning Space
The 1.5 m (5.0 ft) dimension shall be provided in the direction of the pedestrian street crossing....
-
Extensions
Extensions are not required in alterations if they project into cross circulation paths. Extensions must be rounded or returned to the walls, floors, or posts....
-
Suggestions by Jean Tessmer
For cross slopes, measurements should be taken every 6 feet....
-
INFORMATION REQUIREMENTS OF PEDESTRIANS WITH VISION DISABILITIES
Previous research has shown that at many roundabout crossings a substantial number of drivers fail to yield to apparently blind pedestrians (4) (5)....
-
11B-406.5.3 Landings
Section 11B-403.5.1, Exception 3, requires walks and sidewalks to be 48” wide minimum; Section 11B-403.3 requires walks and sidewalks to have a cross-slope of 1:48 or less....
-
1007.9 Signage
Additionally, raised character and Braille signage complying with Chapter 11A, Section 1143A and Chapter 11B, Sections 11B-703.1, 11B-703.2, 11B-703.3 and 11B-703.5, and the International...
-
III-7.4300 Parking
Accessible parking spaces and the required accessible route should be located where individuals with disabilities do not have to cross vehicular lanes or pass behind parked vehicles to have...
-
1.3 Previous Research
or ramp. 1.3.2 Detectable Warnings May Provide Visual Guidance Pedestrians who are visually challenged often have difficulty locating crosswalks, properly aligning themselves to cross...
-
Standing Supports (M304.3 and M305.3)
• Grab bars with non-circular cross sections must have a cross section dimension of 2 inches maximum and a perimeter dimension of 4 inches minimum and 4.8 inches maximum....
-
Elevator requirement to new dining area on the mezzanine of an existing facility
In alterations, an accessible route shall not be required to existing raised or sunken dining areas, or to all parts of existing outdoor dining areas where the same services and decor are...
-
Handouts per Gov Code 65941.6
This question was raised at the CASI summit last week, and brought to attention our need to develop handouts to comply....
-
11B-703.1.1.2 Inspection
The inspection shall include, but not be limited to, verification that Braille dots and cells are properly spaced and the size, proportion and type of raised characters are in compliance...
-
404.2.5 Thresholds
Raised thresholds and changes in level at doorways shall comply with 302 and 303....
-
B4
[ADA Standards § 4.6.5] Yes No If No: Can the route be cleared by removing or raising low objects, or can each van accessible parking space be relocated?...
-
11B-407.2.1 Call controls
Call buttons shall be raised or flush. Exception: Reserved. [2010 ADAS] EXCEPTION: Existing elevators shall be permitted to have recessed call buttons....
-
11B-407.2.1 Call controls
Call buttons shall be raised or flush. Exception: Reserved. [2010 ADAS] EXCEPTION: Existing elevators shall be permitted to have recessed call buttons....
-
11B-703.1.1.2 Inspection
The inspection shall include, but not be limited to, verification that Braille dots and cells are properly spaced and the size, proportion and type of raised characters are in compliance...
-
1009.9 Signage
Additionally, visual characters, raised character and braille signage complying with Chapter 11A, Section 1143A and Chapter 11B, Sections 11B-703.1, 11B-703.2, 11B-703.3 and 11B-703.5 shall...
-
1009.9 Signage
Additionally, visual characters, raised character and braille signage complying with Chapter 11A, Section 1143A and Chapter 11B, Sections 11B-703.1, 11B-703.2, 11B-703.3 and 11B-703.5 shall...
-
221.9 Stadium Style Movie Theaters
Wheelchair spaces and companion seats shall be located on a riser or cross-aisle in the stadium section that satisfies at least one of the following criteria: (i) It is located within the...