Rotational Penetrometer Measurements of Firmness and Stability. The Rotational Penetrometer penetrated significantly more on the dirt (DIRP), chipped brush (CPBR), engineered wood...
Search Results "Ground Transportation"
-
Rotational Penetrometer Measurements of Firmness and Stability
-
305.7.2 Parallel Approach
Alcoves shall be 60 inches (1525 mm) wide minimum where the depth exceeds 15 inches (380 mm).
-
1.1.3
1.1.3 A maximum overall design running slope for exterior accessible surfaces (other than ramps), such as sidewalks, of 4% (approximately 1:25) is recommended. In the ideal case,...
-
11B-305.7.1 Forward approach
Alcoves shall be 36 inches (914 mm) wide minimum where the depth exceeds 24 inches (610 mm).
-
11B-305.7.2 Parallel approach
Alcoves shall be 60 inches (1524 mm) wide minimum where the depth exceeds 15 inches (381 mm).
-
11B-240.2 Play components
Where provided, play components shall comply with Section 11B-240.2.
-
11B-305.7.1 Forward approach
Alcoves shall be 36 inches (914 mm) wide minimum where the depth exceeds 24 inches (610 mm).
-
11B-305.7.2 Parallel approach
Alcoves shall be 60 inches (1524 mm) wide minimum where the depth exceeds 15 inches (381 mm).
-
11B-240.2 Play components
Where provided, play components shall comply with Section 11B-240.2.
- Aviation Consumer Protection
-
§ 36.508 Effective date.
[See subsections ...]
-
§382.159 How are complaints filed with DOT?
[See subsections ...]
-
382.159 How are complaints filed with DOT?
382.159 How are complaints filed with DOT? Changes from the corresponding provision of the existing regulation include a time frame for filing informal complaints, a change of postal...
-
Outputs
Outputs The Department sought comment on certain characteristics of outputs, including the following: Speech Output—The Department proposed to require that speech output be...
-
T602 Wheelchair Spaces
[See subsections ...]
-
Accessible routes
Accessible routes that coincide with, or are located in the same area, as general circulation paths and elements such as ramps, elevators, and fare vending and collection must be...
-
Station platforms
Station platforms must be coordinated with the vehicle floor height. (DOT ADA Standard 810.5.3.)
-
12184(b) Construction
(b) Construction For purposes of subsection (a) of this section, discrimination includes
-
T602 Wheelchair Spaces
The technical requirements for wheelchair spaces include provisions on surfaces, approach, and size. Under the final rule, as with the existing guidelines, one full unobstructed side...
-
T207 Circulation Paths
As a matter of clarification, the proposed rule specified that, where doorways are provided on one side of a non-rail vehicle, an accessible circulation path must connect each...
-
Sec.36.508 Effective date
Sec.36.508 Effective date.
-
27. Hand-Carrying
Except in emergency situations, a passenger's request for a driver to lift the passenger out of his or her mobility device should generally be denied because of the safety, dignity,...
-
§ 38.159(d)(7) Seat belt and shoulder harness
(7) Seat belt and shoulder harness. For each wheelchair or mobility aid securement device provided, a passenger seat belt and shoulder harness, complying with all applicable...
-
§ 38.125(d)(1) Requirements
(1) Requirements. All intercity rail cars required to be accessible by §§38.111 (a) and (e) of this subpart shall provide at least one, but not more than two, mobility aid seating...