The 2010 Standards provide a gap of 3 inches between the edge of a shower seat and the shower compartment entry, and the gap does not appear to interfere with transferring onto and off the...
Search Results "End of Row Compartment"
Filters
Commonly Searched Documents
-
5.3.1 Permitted Obstructions to Transfer Sides for M301 and M302
-
11B-609.3 Spacing
The space between the grab bar and projecting objects below and at the ends shall be 1½ inches (38 mm) minimum....
-
410.6 Doors and Gates
End doors and gates shall provide a clear width 32 inches (815 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1065 mm) minimum....
-
11B-410.6 Doors and gates
End doors and gates shall provide a clear width 32 inches (813 mm) minimum. Side doors and gates shall provide a clear width 42 inches (1067 mm) minimum....
-
2. REGULATORY BUILT-IN TOLERANCES
Building Code Section 1101B.5 indicates all dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end...
-
Handrail Extensions
Handrail Extensions ADAAG addresses handrail height, diameter, and extensions provided to the end of the gangway....
-
610.3.2 L-Shaped Seats
The end of the "L" shall be 22 inches (560 mm) minimum and 23 inches maximum (585 mm) from the main seat wall....
-
5.2.1.3 Transfer Surface Size Recommendations for Stretchers (M301)
The patient would not use the short end as the point of entry because it would require the patient to slide a long distance to lie on the stretcher....
-
Curb Ramps and Blended Transitions (R309.4) (Section-by-Section Analysis)
Parking spaces at the end of block face can be served by curb ramps or blended transitions at the pedestrian street crossing....
-
11B-604.5.1 Side wall
wall grab bar shall be 42 inches (1067 mm) long minimum, located 12 inches (305 mm) maximum from the rear wall and extending 54 inches (1372 mm) minimum from the rear wall with the front end...
-
Section 1193.23 Product design, development and evaluation
At this end of the evaluation spectrum, only one hour of professional time is projected to be required, for an estimated cost of $80....
-
4.Information, documentation, and training
Such information and documentation includes user guides, installation guides for end-user installable devices, and product support communications, regarding both the product in general and...
-
206.7 Platform Lifts, F206.7 Platform Lifts
Amendatory Language For the reasons stated in the preamble, we amend 36 CFR part 1191 as follows: In 206.7, adding a new sentence at the end of the section to read as follows: 206.7...
-
3.6.2. Device Replacement
To account for the ongoing costs associated with the replacement of devices prior to the end of their lifespan and the replacement of these devices at the end of their lifespan, the primary...
-
Section 1194.41 Information, Documentation, and Support (Preamble, Section-by-Section Analysis)
Paragraph (a) states that when an agency provides end-user documentation to users of technology, the agency must ensure that the documentation is available upon request in alternate formats...
-
Collection of Information: Telecommunications Act Accessibility Guidelines; Annual Reporting Burden
method for obtaining information concerning the accessibility and compatibility description of the equipment, alternate formats and customer and technical support for the equipment; and (3) end-user...
-
American Specialties Double Robe Hook 7345
4" (100 mm) wide stainless steel bar forms hook at each end. Unit extends 1 5/8" (40 mm) from wall....
-
Clear Width: ADA Standard Section 403.5.1
Section 403.5.1 covers the current ADA Standards for the clear width of walking surfaces that are part of an accessible route.
-
Minimum Rear Wall Required.
Using the 2010 ADA Standards for Accessible Design, the minimum bench length would be 42" and the width of the clear floor space adjacent to the end of the bench would be 30"....
-
Salsbury Industries Designer Wood Locker Single Tier 3 Wide
cherry or mahogany finish and include a black name / number plate Designer lockers include a black laminated base and are available in 5 feet and 6 feet high (add 4" for base) Each compartment...
-
Salsbury Industries Designer Wood Locker Single Tier 1 Wide
cherry or mahogany finish and include a black name / number plate Designer lockers include a black laminated base and are available in 5 feet and 6 feet high (add 4" for base) Each compartment...
-
Landscape Forms Inc. Parc Vue Bench Collection
backed or backless 72" length Optional end arms for backed bench, factory welded to end frame. Optional seat dividers discourage sleepers and skateboarders....
-
American Specialties Single Robe Hook 7340
Post shall be 1/2" x 1" (13 X 25) rectangular tubing with formed mounting flange and bracket welded on end....
-
Landscape Forms Inc. Strata Bench Collection
The extension of the seating plane past the steel base at the ends makes the seat appear to float....
