Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall....
Search Results "Clear Deck Space"
Filters
Commonly Searched Documents
-
703.4.2 Location
-
703.4.2 Location
Where there is no wall space at the latch side of a single door or at the right side of double doors, signs shall be located on the nearest adjacent wall....
-
E202.4 Functions Located in Maintenance or Monitoring Spaces (Section-by-Section Analysis)
E202.4 Functions Located in Maintenance or Monitoring Spaces (Section-by-Section Analysis) This section proposes to revise § 1194.3(f) of the existing 508 Standards to clarify that, where...
-
11B-221.2.1.1 General seating
Wheelchair spaces complying with Section 11B-802.1 shall be provided in accordance with Table 11B-221.2.1.1....
-
304.3.2 T-Shaped Space
304.3.2 T-Shaped Space. The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
-
Maneuvering Space Where Ramps are Provided
Maneuvering Space Where Ramps are Provided At least one maneuvering space must be provided on the same level as the play component....
-
11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats
11B-802 Wheelchair spaces, companion seats, and designated aisle seats and semi-ambulant seats [2010 ADA Standards] 802 Wheelchair Spaces, Companion Seats, and Designated Aisle Seats ...
-
Pilot Rock CSL-6 and CSL-8 Car Stop
Series Overview Car Stops are made from 100% recycled plastic. They are maintenance free – withstand traffic, weather and salt. With the solid color throughout, they won’t chip...
-
11B-502 Parking spaces
[See subsections ...]
-
Alterations and Water Closet Clearances in Single-User Toilet Rooms With In-Swinging Doors (Section-by-Section Analysis)
The 1991 Standards do not allow an in-swinging door in a toilet or bathing room to overlap the required clear floor space at any accessible fixture....
-
304.3.2 T-Shaped Space
The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
-
Number and Location: ADA Standard Section 221.2.1
Section 221.2.1 covers scoping requirements in the current ADA Standards for the number and location of wheelchair spaces.
-
703.2.7 Character Spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
304.3.2 T-Shaped Space
The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
-
304.3.2 T-Shaped Space
The turning space shall be a T-shaped space within a 60 inch (1525 mm) square minimum with arms and base 36 inches (915 mm) wide minimum....
-
11B-221.2.1 Number and location
Wheelchair spaces shall be provided complying with Section 11B-221.2.1....
-
Side Entry Openings, and Width and Length of Wheelchair Space
Side Entry Openings, and Width and Length of Wheelchair Space If the wheelchair space can only be entered from the side, the ride must be designed to permit sufficient turning space for...
-
Lines of Sight: ADA Standard Section 802.2
Lines of sight to the screen, performance area, or playing field for spectators in wheelchair spaces shall comply with 802.2....
-
Companion Seats: ADA Standard Section 221.3
Section 221.3 covers scoping requirements in the current ADA Standards for companion seats in assembly areas.
-
Parking Spaces Checklist
Parking Spaces Checklist...
-
11B-802.2 Lines of sight
Lines of sight to the screen, performance area, or playing field for spectators in wheelchair spaces shall comply with Section 11B-802.2....
-
T503 Passenger Access Routes
in the proposed rule) must provide clearances sufficient to permit passengers using wheelchairs to move between doorways with accessible boarding and alighting features and wheelchair spaces...
-
11B-502.2 Vehicle spaces
Car and van parking spaces shall be 216 inches (5486 mm) long minimum....
