Knee and toe clearance shall be provided and comply with Section 11B-306.
Search Results "Accessible Feature"
-
11B-809.10.8.4 Knee and toe clearance
-
11B-809.10.8 Lavatories, vanities, mirrors and towel bars
Bathing rooms or powder rooms required to comply with Section 11B-809.10 shall provide lavatories complying with this section. Where mirrors or towel bars are provided, no less than...
-
11B-809.10.7.4 Seat height
Water closet seats shall be 15 inches (381 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat above the finish floor.
-
11B-809.10.5.3 Controls
Controls and operating mechanisms shall comply with Section 11B-309.4. Exception: Shower spray units are not required in bathtubs.
-
11B-809.8.1 Door Thresholds
Primary entry doors, required exit doors, and interior doors intended for user passage shall have thresholds complying with Section 11B-404.2.5. Secondary exterior door thresholds,...
-
11B-809.10.8.5 Plumbing protection
Plumbing protection shall comply with Section 11B-809.9.7.
-
11B-809.10.7.2 Location
Water closets shall be located within bathrooms in a manner that permits a grab bar to be installed on at least one side of the fixture. The centerline of the water closet shall be...
-
11B-809.10.7.3 Reinforcement for grab bars
Reinforcement for grabs bars shall comply with the following: Where water closets are not placed adjacent to a side wall capable of accommodating a grab bar, the bathroom...
-
68.70. Registered Accessibility Specialists--Qualifications for Certification
Registered Accessibility Specialists--Qualifications for Certification....
-
Common Use Areas in Residential Facilities—Section 203.8 of the 2010 Standards
Section 203.8 of the 2010 Standards provides that, in residential facilities, common use areas that do not serve residential dwelling units required to provide mobility features are not...
-
SafetySign Reserved Parking Sign with Universal Access Symbol
Outdoor Durability: up to 7 years (except orange) Service Temp Range: -40°F to 200°F Ink Features: Translucent inks (Translucent ink or film is not applicable to the color black) Printing...
-
Scranton Toilet Partitions: Eclipse - Floor Mount Headrail
3D Rendering of Eclipse Toilet Partition
-
Conflict with Local Accessibility Codes
laws that impose higher accessibility standards (53 FR 45005)....
-
412.2.6 Accessibility
[DSA-AC] In air traffic control towers, an accessible route shall not be required to serve the cab and the equipment areas on the floor immediately below the cab....
-
Location of Accessible Routes to Stages
Location of Accessible Routes to Stages. The 1991 Standards at section 4.33.5 require an accessible route to connect the accessible seating and the performing area....
-
Direct Access Entrances from Parking Structures
Direct Access Entrances from Parking Structures....
-
1. Adoption of the 2010 ADA Standards for Accessible Design
Adoption of the 2010 ADA Standards for Accessible Design....
-
§ 35.151(f)(1)
(1) Kitchens within housing units containing accessible sleeping rooms with mobility features (including suites and clustered sleeping rooms) or on floors containing accessible sleeping...
-
1014.1 General
This section contains the technical requirements for camp shelters with mobility features....
-
Van Accessible Parking Spaces
Van Accessible Parking Spaces. The 1991 Standards, at sections 4.1.2 (5)(b), 4.6.3, 4.6.4, and 4.6.5, require one in every eight accessible parking spaces to be van accessible....
-
Notifying the Access Board When an Entire Trail or Beach Access Route is Exempted [F204.4.1]
In the rare cases where an entire trail or beach access route is exempted, Federal agencies must notify the Access Board about the exemption....
-
68.76. Standards of Conduct for the Registered Accessibility Specialist
Standards of Conduct for the Registered Accessibility Specialist....
-
III. Proposed Accessibility Guidelines
On June 15, 1990, the Department published proposed Fair Housing Accessibility guidelines (55 FR 24370)....
-
Toilet Compartments: ADA Standard Section 213.3.1
Section 213.3.1 covers scoping requirements in the current ADA Standards for toilet compartments.
