In the NPRM the Board had asked (Question 6) whether the ADAAG provisions for controls and operating mechanisms and reach ranges should be included here....
Search Results "ASME: American Society of Mechanical Engineers"
Commonly Searched Documents
-
Paragraph (f) Operable with limited reach and strength (Section-by-Section Analysis)
-
Sec.36.403(b) Primary function
Mechanical rooms, boiler rooms, supply storage rooms, employee lounges or locker rooms, janitorial closets, entrances, corridors, and restrooms are not areas containing a primary function...
-
Compatible
To achieve compatibility, the FCC rules require: external electronic access to all information and control mechanisms a connection point for external audio processing devices...
-
11B-1002.4.4 Clearances
Wheelchair spaces shall be permitted to be mechanically or manually repositioned. 3. Wheelchair spaces shall not be required to comply with Section 11B-307.4 _|Vertical Clearance|_....
-
11B-407.2.1.2 Size and shape
The buttons shall be activated by a mechanical motion that is detectable. [2010 ADAS] 407.2.1.2 Size. Call buttons shall be ¾ inch (19 mm) minimum in the smallest dimension....
-
§27.72(c)
Each airport operator shall negotiate in good faith with each U.S. carrier serving the airport concerning the acquisition and use of boarding assistance devices to ensure the provision of mechanical...
-
Must all new or reconstructed facilities be accessible?
These include observation galleries, mechanical equipment rooms, and spaces or facilities designed for use by employees needing considerable dexterity and special abilities....
-
General guidance
Where a long description is needed, there are mechanisms other than alt-text that can be employed....
-
Alteration
Normal maintenance, re-roofing, painting or wallpapering, or changes to mechanical and electrical systems are not alterations unless they affect the usability of the building or facility...
-
§ 36.403(b) Primary function.
Mechanical rooms, boiler rooms, supply storage rooms, employee lounges or locker rooms, janitorial closets, entrances, corridors, and restrooms are not areas containing a primary function...
-
Recumbent Tricycles
Manufacturers strive to maintain a low center of gravity and use high-tech steering mechanisms to overcome turning instability problems....
-
11B-407.2.1.2 Size and shape
The buttons shall be activated by a mechanical motion that is detectable. [2010 ADAS] 407.2.1.2 Size. Call buttons shall be ¾ inch (19 mm) minimum in the smallest dimension....
-
11B-1002.4.4 Clearances
Wheelchair spaces shall be permitted to be mechanically or manually repositioned. 3. Wheelchair spaces shall not be required to comply with Section 11B-307.4 _|Vertical Clearance|_....
-
§ 38.23(a) General
All vehicles covered by this subpart shall provide a level-change mechanism or boarding device (e.g., lift or ramp) complying with paragraph (b) or (c) of this section and sufficient clearances...
-
11B-407.2.1.2 Size and shape
The buttons shall be activated by a mechanical motion that is detectable. [2010 ADA Standards] 407.2.1.2 Size....
- Marx|Okubo Associates, Inc., Accessibility Group (ADA and FFHA)
-
11B-706.1 General
Selecting or specifying an effective assistive listening system for a large or complex venue requires assistance from a professional sound engineer....
-
11B-233.3.1.2.6.3 Test number two, site analysis test
The accuracy of the slope analysis shall be certified by a licensed engineer, landscape architect, architect or surveyor. 2....
-
1. Scope
and reporting an estimate of pathway roughness for sidewalks and other pedestrian surfaces. 1.3 This practice is based on an algorithm developed at the University of Pittsburgh Human Engineering...
-
IV. Discussion of Findings and Implications
Inaccessible routes with undulating surface material were identified at playgrounds with engineered wood fiber. ...
-
4.1.4(5) BUSINESS
Laboratories: testing & research Laundries Motor vehicle service stations Police stations Post offices* Print shops Professional services: attorney, dentist, physician, engineer...
-
Section 37.89 Remanufacture of Intercity and Commuter Rail Cars
Feasible is defined in paragraph (c) of the section to be “unless an engineering analysis demonstrates that remanufacturing the car to be accessible would have a significant adverse effect...
-
Standards and Anthropometry for Wheeled Mobility
It builds on research completed as part of the Rehabilitation Engineering Research Center on Universal Design at Buffalo from 1999 – 2004....
-
Bus Loading Zones: ADA Standard Section 209.2.2
Section 209.2.2 covers scoping requirements in the current ADA Standards for bus loading zones.