Transfer platforms shall have level surfaces 14 inches (356 mm) deep minimum and 24 inches (610 mm) wide minimum.
Search Results "Play Area Ramp"
Filters
Commonly Searched Documents
-
11B-1008.3.1.1 Size
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface.
-
11B-1008.3.2.1 Size
Transfer steps shall have level surfaces 14 inches (356 mm) deep minimum and 24 inches (610 mm) wide minimum.
-
11B-1008.3.2.2 Height
Each transfer step shall be 8 inches (203 mm) high maximum.
-
§ 38.95(c)(4) Ramp barriers
(4) Ramp barriers. Each side of the ramp or bridge plate shall have barriers at least 2 inches high to prevent mobility aid wheels from slipping off....
-
§ 38.23(c)(8) Handrails
grasp them from outside the vehicle while starting to board, and to continue to use them throughout the boarding process, and shall have the top between 30 inches and 38 inches above the ramp...
-
4.1.3(3) COMMON AREAS
At least one of each type of common area and amenity in each project shall be accessible and shall be located on an accessible route to any accessible dwelling unit....
-
EZ-ACCESS The Gateway™ Solid Surface Portable Ramp Video
Requires the Registered User plan or above. Login! -
Access to Performing Areas [4.33.5]
Access to Performing Areas [4.33.5] An accessible route must connect wheelchair spaces with performing areas, including stages, arena floors, playing fields, dressing and locker rooms...
-
11B-203.12 Animal containment areas
11B-203.12 Animal containment areas. Animal containment areas that are not for public use shall not be required to comply with these requirements or to be on an accessible route....
-
4.34.2(15)
(15) The following spaces shall be accessible and shall be on an accessible route: (a) The living area. (b) The dining area....
-
Beneficial Designs High Efficiency Trail Assessment Process (HETAP) Software 3.0 Wheeled Instrumentation Sensor Package for Data Collection
Key HETAP and UTAP Differences HETAP follows the same general principles as its predecessor, UTAP (the Universal Trail Assessment Process). Both collect objective trail...
-
11B-247.1.2.5 Hazardous vehicular areas
If a walk crosses or adjoins a vehicular way, and the walking surfaces are not separated by curbs, railings or other elements between the pedestrian areas and vehicular areas, the boundary...
-
11B-247.1.2.5 Hazardous vehicular areas
If a walk crosses or adjoins a vehicular way, and the walking surfaces are not separated by curbs, railings or other elements between the pedestrian areas and vehicular areas, the boundary...
-
T404 Level Boarding and Alighting
[See subsections ...]
-
F. What are Pedestrian Crossings and Where Must Curb Ramps be Provided?
Where and when curb ramps are required depends on the location and the age of streets and sidewalks....
-
4.8.4 LANDINGS
Ramps shall have level landings at the bottom and top of each run. Landings shall have the following features: (1) The landing shall be at least as wide as the ramp run leading to it...
-
[F] 907.5.2.3.2 Employee work areas
[F] 907.5.2.3.2 Employee work areas. ...
-
7 [§ 4.7.8]
7 [§ 4.7.8] Curb ramps must be located where they will not be obstructed by parked vehicles....
-
11B-705.1.2.5 Hazardous vehicular areas
11B-705.1.2.5 Hazardous vehicular areas. Detectable warnings at hazardous vehicular areas shall be 36 inches (914 mm) in width....
-
11B-246 OUTDOOR DEVELOPED AREAS
[See subsections ...]
-
11B-246 Outdoor developed areas.
[See subsections ...]
-
11B-246 Outdoor developed areas
[See subsections ...]
-
§ 38.83(c)(3) Ramp threshold
(3) Ramp threshold....
