Ramp handrails shall extend horizontally above the landing for 12 inches (305 mm) minimum beyond the top and bottom of ramp runs....
Search Results "Minimum Dimension"
-
11B-505.10.1 Top and bottom extension at ramps
-
11B-812.4 Vertical clearance
Vehicle spaces, access aisles serving them, and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum....
-
11B-1009.6.1 Pool stairs
Exception: Pool step riser heights shall not be required to be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum provided that riser heights are uniform....
-
11B-1009.2.2 Seat location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
-
11B-1009.2.2 Seat location
In the raised position, the centerline of the seat shall be located over the deck and 16 inches (406 mm) minimum from the edge of the pool....
-
11B-812.4 Vertical clearance
Vehicle spaces, access aisles serving them, and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum....
-
11B-810.9 Escalators
Where provided, escalators shall comply with the sections 6.1.3.5.6 and 6.1.3.6.5 of ASME A17.1 and shall have a clear width of 32 inches (813 mm) minimum....
-
11B-1009.6.1 Pool stairs
Exception: Pool step riser heights shall not be required to be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum provided that riser heights are uniform....
-
11B-505.10.1 Top and bottom extension at ramps
Ramp handrails shall extend horizontally above the landing for 12 inches (305 mm) minimum beyond the top and bottom of ramp runs....
-
Independent Living Center of the North Shore and Cape Ann Inc. (ILCNSCA) - Salem, MA
A minimum of 50% of the Board of Directors and direct services staff must be persons who have disabilities, and the Executive Director must also be a person with a disability....
-
ALIGNMENT OF 19-INCH RECOMMENDATION WITH ACCESS BOARD PROPOSED RULEMAKING
In its proposed rule, the Access Board proposed that the “height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured...
-
Clear Floor or Ground Space: ADA Standard Section 902.4.1
Knee and toe clearance complying with 306 shall be provided, except that knee clearance 24 inches (610 mm) minimum above the finish floor or ground shall be permitted....
-
M301.2.2, M302.2.2 Transfer Size
M301.2.2, M302.2.2 Transfer Size Proposed requirement: 30" wide minimum and 15" deep minimum • Sub-Committee Recommendation: 28" wide minimum and 17" deep minimum....
-
Cybex 625AT Arc Trainer - How to Use Demonstration Video
CYBEX equipment is innovative in design, durable in structure and engineered to be biomechanically correct to produce optimum results with minimum stress on the body -- this is the CYBEX...
-
Cybex 625C Upright Bike - How to Use Demonstration Video
CYBEX equipment is innovative in design, durable in structure and engineered to be biomechanically correct to produce optimum results with minimum stress on the body -- this is the CYBEX...
-
Cybex 625T Treadmill - How to Use Demonstration Video
CYBEX equipment is innovative in design, durable in structure and engineered to be biomechanically correct to produce optimum results with minimum stress on the body -- this is the CYBEX...
-
Delta Widespread Lavatory Faucet 3552-MPU-DST
high 3 3/16" from deck to spout Metal lever handles Red/blue indicators Metal pop-up 3/8" compression fittings 2 1/4" max. deck thickness No thick deck kit available 32" minimum...
-
Don-Jo Mfg., Inc. Door Viewers ULDV 180
Number ULDV 180 Dimensions 180 Degrees Ansi L23221 Shelf pack 10 Finishes 605, 626 Features...
-
Don-Jo Mfg., Inc. Door Viewers DV 180
Number DV 180 Dimensions 180 Degrees Ansi L21371 Shelf pack 10 Finishes 605, 626 Features...
-
Don-Jo Mfg., Inc. Door Viewers DV 90
Number DV 90 Dimensions 160 Degrees Ansi L21372 Shelf pack 10 Finishes 605, 626 Features Plastic...
-
Handrail Gripping Surfaces: ADA Standard Section 1008.2.5.3.1
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
11B-1008.2.5.3.1 Handrail gripping surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
Guiding Principles
important for the development of effective mental images Ideally a visitor should be able to explore an entire tactile piece while standing in one spot, which gives an overall dimension...
