The manufacturer’s design load represents the amount of weight that the lift is capable of supporting....
Search Results "Head Support"
Filters
Commonly Searched Documents
-
The National Highway Traffic Safety Administration’s (NHTSA) motor vehicle safety regulations require that a wheelchair lift be tested to withstand a 600-pound load. If the manufacturer states that the design load is 800 pounds, can the transportation operator limit actual use to 600 pounds for safety reasons?
-
11B-1009.2.4 Seat
The seat shall be rigid and shall have a back support that is at least 12 inches (305 mm) tall....
-
410.5 Digital Encoding of Speech (Section-by-Section Analysis)
systems would exempt such systems from conformance to ITU-T Recommendation G.722 provided that they conform to another standard that ensures equivalent or better acoustic performance and support...
-
4.1.3(19)(b)
For other assembly areas, a permanently installed assistive listening system, or an adequate number of electrical outlets or other supplementary wiring necessary to support a portable assistive...
-
2.2.1 Demographic Information
., power chair, scooter), and within each type: make, model, age, armrests, footrests, drive wheels, controller, seat support surfaces and overall condition of the seating surface....
-
Bathtub
Rather, grab bars were provided adjacent to the tub for temporary support to enable an individual to steady him/herself while a care provider assisted with removal and replacement of clothing...
-
FAQ: How do I speak to a live technical specialist?
The ADA National Network provides information, guidance and training on how to implement the Americans with Disabilities Act (ADA) in order to support the mission of the ADA to “assure equality...
-
Q. Does the ADA take safety issues into account?
However, an employer may not simply assume that a threat exists; the employer must establish through objective, medically supportable methods that there is genuine risk that substantial...
-
§ 38.23(c)(8) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
§ 38.95(c)(8) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
§ 38.83(c)(8) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
§ 38.125(c)(8) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
Bobrick Swing-Up Grab Bar B-4998
., satin-finish stainless steel Swing-up grab bar is manually raised for approach or departure and lowered to horizontal position for support; once grab bar is raised to the full upright...
-
Meet Chanelle Cast Video (with open captions and audio introduction)
Chanelle was able to return to work after a spinal cord injury thanks to support from her family, supervisor, coworkers and healthcare providers....
-
Bobrick Folding Shower Seat B-517
Supports up to 360 lbs (163 kg) when properly installed. Seat 32 7/8" (835mm) wide, projects 22 11/16" (575mm) from wall. Right-hand seat....
-
Landscape Forms Inc. Presidio Bench Collection
Backed seats on curved runs may face inside or outside the circle Optional tubular steel arms welded to seats: one or two per seat Seats bolt securely to horizontal tubular steel support...
-
Bobrick Folding Shower Seat B-518
Supports up to 360 lbs (163 kg) when properly installed. Seat 32 7/8" (835mm) wide, projects 22 11/16" (575mm) from wall. Left-hand seat....
-
Whitehall Mfg. Hot & Cold Piezo Pushbuttons Electronic Valve Conical Faucet 4" Centerset
Model Number: 3374-PPZ Features: Conical spray head faucet and button(s) mounted on stainless steel 6-1/2 x 3-1/4" (165.1 x 82.6 mm) escutcheon panel; two buttons for Hot and Cold; Flat...
-
Stanley FBB 266 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
weight gauges increase available bearing surface area for maximum friction reduction Hinges can be furnished with hospital tips Full surface and half surface hinges packed with flat head...
-
Stanley FBB 268 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
weight gauges increase available bearing surface area for maximum friction reduction Hinges can be furnished with hospital tips Full surface and half surface hinges packed with flat head...
-
Stanley FBB 264 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
weight gauges increase available bearing surface area for maximum friction reduction Hinges can be furnished with hospital tips Full surface and half surface hinges packed with flat head...
-
Stanley FBB 269 Heavy Weight Ball Bearing “Swing Clear” Offset Door Hinge
weight gauges increase available bearing surface area for maximum friction reduction Hinges can be furnished with hospital tips Full surface and half surface hinges packed with flat head...
-
Issue 1: APS volume
Volume adjustments differ by manufacturer: some devices can be set through a hand-held PDA, while others require adjusting set screws on a control board mounted in the pedestrian signal head...
-
RESEARCH NEEDS
The solid amber is followed by two solid red lenses that are illuminated for the duration of the walk phase on the pedestrian signal head....
