8. Mirrors and towel fixtures. Where mirrors or towel fixtures are provided they shall be mounted with the bottom edge no higher than 40 inches (1016 mm) from the floor.
Search Results "Dwelling Unit (FHA)"
Commonly Searched Documents
-
1134A.8, Item 8
-
1134A.5, Item 1
1. Floor space. There shall be a minimum clear floor space 48 inches parallel by 30 inches perpendicular (1219 mm by 762 mm) to the side of a bathtub or bathtub-shower...
-
1134A.6, Item 1.3
1.3 Other shower stall configurations shall measure at least 36 inches deep by 60 inches wide (914 mm by 1524 mm) with an entrance opening of at least 36 inches (914 mm) when a...
-
1134A.7, Item 3
3. Seat height. The minimum height of water closet seats shall be 15 inches (381 mm) above the floor.
-
1134A.8, Item 6
6. Plumbing protection. Water supply and drain pipes under lavatories shall be insulated or otherwise covered to protect against contact. There shall be no sharp or abrasive...
-
1134A.5, Item 1
1. Floor space. There shall be a minimum clear floor space 48 inches parallel by 30 inches perpendicular (1219 mm by 762 mm) to the side of a bathtub or bathtub-shower combination to...
-
1134A.6, Item 1.3
1.3. Other shower stall configurations shall measure at least 36 inches deep by 60 inches wide (914 mm by 1524 mm) with an entrance opening of at least 36 inches (914 mm) when a wall...
-
1134A.7, Item 3
3. Seat height. The minimum height of water closet seats shall be 15 inches (381 mm) above the floor.
-
1134A.8, Item 6
6. Plumbing protection. Water supply and drain pipes under lavatories shall be insulated or otherwise covered to protect against contact. There shall be no sharp or abrasive surfaces...
-
1134A.8, Item 8
8. Mirrors and towel fixtures. Where mirrors or towel fixtures are provided they shall be mounted with the bottom edge no higher than 40 inches (1016 mm) from the floor.
-
608.5.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor...
- Figure 608.5.3 Alternate Roll-In Type Shower Compartment Control Location – Drawing from the U.S. Access Board
-
Costs
FEMA’s current baseline target inventory is 2,000 units and 298 of the units (approximately 15 percent of the units) are targeted as UFAS compliant.46 The actual number of emergency transportable...
-
3.5.1 General
Use of the ISA for identification of accessible camping units shall conform to 3.2.6. Use of the ISA for identification of accessible picnic units shall conform to 3.3.3....
-
11B-608.5.3 Alternate roll-in type shower compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located on the side wall of the compartment adjacent to the 16 inches (406 mm) minimum...
-
F244.5.3 Routes to Adjacent Recreation Facilities
Where a circulation path connects camping facilities and adjacent recreation facilities, this section requires at least one outdoor recreation access route to connect camping units with...
-
608.5.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor...
-
608.5.3 Alternate Roll-In Type Shower Compartments
In alternate roll-in type shower compartments, the controls, faucets, and shower spray unit shall be located above the grab bar, but no higher than 48 inches (1220 mm) above the shower floor...
-
F244.5.2 Routes to and Within Common Use and Public Use Areas
Common use and public use areas serving camping units with mobility features shall provide outdoor recreation access routes in accordance with F244.5.2....
- Access Board: Parallel Approach at an Alcove
- Access Board: Forward Approach at an Alcove
- Access Board: Clear Width at Turn
-
206.7 Platform Lifts, F206.7 Platform Lifts
The floor level of emergency transportable housing units is elevated above the ground....
-
11B-233.3.1.2.6.5 Additional requirements.
1. Grab bar reinforcement complying with Sections 11B-809.10.5.2, 11B-809.10.6.4, or 11B-809.10.7.3. 2. Interior door opening width complying with Section 11B-404.3.1. 3....