M303.3.3 Ramped. Changes in level greater than ½ inch high shall be ramped and shall comply with M303.3.3. M303.3.3.1 Running Slope....
Search Results "Curved Curb Ramp"
-
5.8.1.2 Entry to Wheelchair Spaces on Raised Platforms
-
§ 382.39 Provision of services and equipment
assistance shall include, as needed, the services personnel and the use of ground wheelchairs, boarding wheelchairs, on-board wheelchairs where provided in accordance with this part, and ramps...
-
11B-1003.2.1 Boat slips
Changes in level complying with Sections 11B-303.3 and 11B-303.4 shall be permitted on the surfaces of gangways and boat launch ramps....
-
Boat Slips: ADA Standard Section 1003.2.1
Changes in level complying with 303.3 and 303.4 shall be permitted on the surfaces of gangways and boat launch ramps. Advisory 1003.2.1 Boat Slips Exception 3....
-
11B-1003.2.1 Boat slips
Changes in level complying with Sections 11B-303.3 and 11B-303.4 shall be permitted on the surfaces of gangways and boat launch ramps....
-
SafePath: Sport Floor Reducers for ADA and Disability Access
Showing Rubber Reducers for the Sport Floor Industry, Basketball Courts and ADA access. Disability access for Gym Floors. Proper installation of raised wood floors, especially in...
-
EZ Dock EZ Launch® System for Kayaks and Canoes
The EZ Launch® System is a safe and easy way to launch and dock kayaks and canoes. Great for people with disabilities, children or seniors. Users will feel confident transferring...
-
§ 38.95(c)(8) Handrails
to grasp them from outside the car while starting to board, and to continue to use them throughout the boarding process, and shall have the top between 30 inches and 38 inches above the ramp...
-
§ 38.125(c)(8) Handrails
to grasp them from outside the car while starting to board, and to continue to use them throughout the boarding process, and shall have the top between 30 inches and 38 inches above the ramp...
-
Boarding and Deplaning Assistance Where Level-Entry Boarding is Unavailable
enplanements where level-entry boarding is not available [Secs. 382.40(a) and 382.40a(a)], carriers must provide boarding assistance to passengers with a disability using mechanical lifts, ramps...
-
M303.3.3.2 Cross Slope
The cross slope of ramp runs shall not be steeper than 1:48....
-
M303.3.3.2 Cross Slope
The cross slope of ramp runs shall not be steeper than 1:48....
-
M303.3.3.4 Edge Protection
Ramps with drop offs ½ inch (13 mm) or greater shall provide edge protection 2 inches (50 mm) high minimum on each side....
-
4.1.7(2)(b) Alterations to Qualified Historic Buildings and Facilities Not Subject to Section 106 of the National Historic Preservation Act
section 106 of the National Historic Preservation Act, if the entity undertaking the alterations believes that compliance with the requirements for accessible routes (exterior and interior), ramps...
-
Level boarding
If not using a lift or ramp to provide level boarding, the grantee must submit to FTA a demonstration of equivalent facilitation....
-
Polling places that cannot be remediated with temporary measures:
Sidewalks and Walkways: The exterior ramp does not include handrails on each side of the ramp (1991 ADA Stds 4.8.5; 2010 ADA Stds 405.8, 505.2)....
-
Kompan, Inc. Sandboxes and Water Play - M512P - Sand Pit
Requires the Premium User plan or above. (Login or upgrade your account!) -
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
505.6 Gripping Surface
Handrail gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides. The bottoms of handrail gripping sufaces shall not be...
-
T502.2.2 Other Vehicles
For other non-rail vehicles, the vertical clearance at doorways shall be 56 inches (1420 mm) minimum on small non-rail vehicles and 68 inches (1725 mm) on large non-rail vehicles.
-
11B-505.6 Gripping surface
Handrail gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides. The bottoms of handrail gripping surfaces shall not be...
-
11B-505.7.1 Circular cross section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
505.6 Gripping Surface
Handrail gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides. The bottoms of handrail gripping surfaces shall not be...
