However, where parking levels serve different building entrances, accessible spaces should be dispersed so that access is provided to each entrance. ◼...
Search Results "Vertical Dispersion"
-
11B-208.2 Minimum number
-
1010.1.4 Floor elevation
Landings shall be level except for exterior landings, which are permitted to have a slope not to exceed 0.25 unit vertical in 12 units horizontal (2-percent slope)....
-
1010.1.4 Floor elevation
Landings shall be level except for exterior landings, which are permitted to have a slope not to exceed 0.25 unit vertical in 12 units horizontal (2-percent slope)....
-
810.5.3 Platform and Vehicle Floor Coordination
The height and position of a platform must be coordinated with the floor of the vehicles it serves to minimize the vertical and horizontal gaps, in accordance with the ADA Accessibility...
-
Benches
Benches must be strong enough to withstand a vertical or horizontal force of 250 pounds applied at any point on the seat, fastener, mounting device, or supporting structure....
-
810.5.3 Platform and Vehicle Floor Coordination
The height and position of a platform must be coordinated with the floor of the vehicles it serves to minimize the vertical and horizontal gaps, in accordance with the ADA Accessibility...
-
Model Building Codes and Industry Standards
For example, unlike the ADA guidelines, the ANSI standards require an additional vertical grab bar at water closets, transfer shower stalls, and tubs....
-
§ 38.175(a)
Vertical alignment may be accomplished by car air suspension or other suitable means of meeting the requirement....
-
1118B.3
Changes in level up to 1/4 inch (6.4 mm) may be vertical and without edge treatment [see Figure 11B-5E(c)]....
-
Corbin Russwin Inc. ED3000 Series Crossbar Exit Device
The ED3000 is available as Rim, Mortise, and Surface Vertical Rod....
-
Landscape Forms Inc. FGP Trash Receptacle
Its cast aluminum rim and rotational-molded base are connected with vertical wood slats in between. The cast aluminum top is hinged to swing up for easy servicing....
-
Hollaender ADA Handrail Systems: Grabrail (ADA Rail)
An ADA rail is the framework of (usually) two horizontal rails supported by vertical posts, manufactured from fittings and pipe....
-
PEMKO 5" Latching Panic Saddle Threshold No. 2006-T
About Latching Panic Saddle Thresholds Latching Panic thresholds are designed to work in conjunction with surface applied vertical rod exit devices....
-
PEMKO 5" Latching Panic Saddle Threshold No. 2005-T
About Latching Panic Saddle Thresholds Latching Panic thresholds are designed to work in conjunction with surface applied vertical rod exit devices....
-
PEMKO 5 5/16" Latching Panic Saddle Threshold No. 273x224-FGT
About Latching Panic Saddle Thresholds Latching Panic thresholds are designed to work in conjunction with surface applied vertical rod exit devices....
-
Kawneer North America AA™250/425 Thermal Entrances
Key Features include AA™250 narrow stile has 2-1/2" vertical stiles, 2-1/2" top rail, and 3-7/8" bottom rail AA™425 wide stile has 4-1/4" vertical stiles, 4-1/4" top rail, and 6-...
-
M301.4.1 Clearance in Base (Section-by-Section Analysis)
Three commenters (two manufacturers and one medical association) raised concerns with the six-inch vertical clearance measured from the floor requirement....
-
Section 36.308 Seating in Assembly Areas (Section-by-Section Analysis)
Section 36.308(a)(1)(ii)(A) and (B) have been revised to provide that wheelchair and companion seats must be an integral part of the seating area, dispersed to all accessible seating levels...
-
Element-by-Element Safe Harbor for Existing Facilities
The 2010 Standards for assembly areas contain revised requirements for dispersion of accessible seating, sightlines over standing spectators, and companion seating....
-
11B-805 Medical care and long-term care facilities
Touch screen units shall be allowed to be vertically mounted with the centerline of the display screen no more than 52 inches above the floor in compliance with Section 11B-707.7.1.1....
-
Resting Intervals [1016.8]
The vertical alignment of the ORAR, turning space, and resting interval must be nominally planar (i.e., as flat as possible) so that all the wheels of a mobility device touch the ground...
-
Dune Crossings [1018.10]
The technical requirements for dune crossings do not address the vertical pickets provided in some handrail designs....
-
1. Typical Issues for Individuals Who Use Wheelchairs, Scooters, or other Mobility Devices
Ramps with a vertical rise of more than 6 inches must have handrails on both sides....
-
Transit Stops (R308.1) (Section-by-Section Analysis)
Boarding platforms at transit stops must be positioned to coordinate with vehicles to minimize the vertical and horizontal gaps....
