DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT Office of the Assistant Secretary for Fair Housing and Equal Opportunity 24 CFR Part 100 [Docket No. N-91-2011; FR 2665-N-06] Fair...
Search Results "Trail Constructed Feature"
-
24 CFR Part 100—Fair Housing Accessibility Guidelines, Preamble
- Designing Accessible Communities
-
When is a facility considered accessible?
A facility is accessible if it was constructed in compliance with the accessibility guidelines that were in force at the time of its construction....
-
F223.2.2 Facilities Specializing in Treating Conditions That Affect Mobility
In facilities specializing in treating conditions that affect mobility, 100 percent of the patient sleeping rooms shall provide mobility features complying with 805....
-
223.2.2 Facilities Specializing in Treating Conditions That Affect Mobility
In facilities specializing in treating conditions that affect mobility, 100 percent of the patient sleeping rooms shall provide mobility features complying with 805....
-
11B-809.10.6.1 Size
the reference to Section 11B-608.1 for accessible transfer showers and replaces the reference with specific shower requirements applicable to residential dwelling units with adaptable features...
-
§8.4(b)(6)
benefit, or service provided under a program or activity receiving Federal financial assistance includes any housing, aid, benefit, or service provided in or through a facility that has been constructed...
-
Title II Public Entity Facilities Compliance Fact Sheet
New Construction: All new facilities constructed by, on behalf of or for the use of a public entity shall be designed and constructed to be readily accessible to and usable by persons...
- Wooster Products Flex-Tred Anti-Slip Tape
-
223.2.2 Facilities Specializing in Treating Conditions That Affect Mobility
In facilities specializing in treating conditions that affect mobility, 100 percent of the patient sleeping rooms shall provide mobility features complying with 805....
-
STEP 3: MAKE SURE THE BUILDING PLANS DO NOT CONTAIN COMMON ADA MISTAKES.
Often, ADA mistakes at lodging facilities can be traced back to construction documents, such as site and building plans....
-
PHYSICAL CHANGES TO FACILITIES
The elements or features of the City of Waukegan facilities that do not comply with the Standards, including those listed in this section, prevent persons with disabilities from fully...
-
An Overview of the Basic ADA Facility Requirements for Public Accommodations and Commercial Facilities
◼ An Overview of the Basic ADA Facility Requirements for Public Accommodations and Commercial Facilities [Click here to view or download the PDF version of "An Overview of the...
-
Bus boarding and alighting areas
Bus boarding and alighting areas must be in compliance with the ADA-ABA Guidelines (Section 810.2), which address surfaces (sturdy), dimensions (96" long x 60" wide); connection to...
-
10.4.1(3)
(3) Ticketing areas shall permit persons with disabilities to obtain a ticket and check baggage and shall comply with 7.2.
-
§100.205(g)
(g)
-
1.1.12 Ramp cross slope
1.1.12 Ramp cross slope. Measure for overall cross slope of ramps by establishing elevations at the extreme edges of the ramp at the top and bottom of the ramp and calculate the...
- U.S. Tape Company, Inc. Digi-Pro
-
Physical Accessibility
Under Section 504, facilities (such as buildings) that were built or altered on or after June 4, 1977, are referred to as new construction.110 Specific construction and design standards...
-
Transient Lodging: ADA Standard Section 215.4
Section 215.4 covers scoping requirements in the current ADA Standards for fire alarm systems in transient lodging.
-
11B-809.10.7.5 Controls
Controls shall be mounted 44 inches (1118 mm) maximum above the finish floor. The force required to activate controls shall be 5 pounds (22.2 mm) maximum.
-
11B-809.10.8.3 Cabinets
Cabinets shall be removable without the use of specialized knowledge and/or tools. The finished floor shall extend to the wall under the lavatory.
-
11B-809.9.2 Clear width
Kitchens shall have a minimum clear width measured between any cabinet, work surface or the face of any appliance (excluding handles and controls) and the opposing cabinet, work...
-
11B-809.9.7 Exposed pipes and surfaces
Exposed water supply and drain pipes under sinks and lavatories shall comply with Section 11B-606.5.