A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the transfer device....
Search Results "Ground Level Play Component"
-
11B-1002.6.1 Clear floor or ground space
- StormPave Permeable Clay Pavers
-
11B-302.3 Openings
Openings in floor or ground surfaces shall not allow passage of a sphere more than ½ inch (12.7 mm) diameter except as allowed in Sections 11B-407.4.3 _|Platform to Hoistway Clearance|_,...
-
1018.5 Obstacles
Obstacles on beach access routes and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point. EXCEPTION: Where the surface is other...
-
16. In § 38.111
§ 38.111 [Amended] 16. In § 38.111,
-
1018.5 Obstacles
Obstacles on beach access routes and resting intervals shall not exceed 1/2 inch (13 mm) in height measured vertically to the highest point. EXCEPTION: Where the surface is other...
-
§ 38.111(b)
(b)
-
4(2)
(2) In single-story dwelling units, changes in level within the dwelling unit with heights between 1/4 inch and 1/2 inch are beveled with a slope no greater than 1:2....
-
1015.5 Surface
This section requires the surface of the clear ground space and turning space to be firm and stable....
-
306.1 General
Where space beneath an element is included as part of clear floor or ground space or turning space, the space shall comply with 306....
-
306.1 General
Where space beneath an element is included as part of clear floor or ground space or turning space, the space shall comply with 306....
-
306.1 General
Where space beneath an element is included as part of clear floor or ground space or turning space, the space shall comply with 306....
-
11B-233.3.1.2.6.2 Test number one, individual building test
To determine site impracticality, the slope would be measured at ground level from the point of the planned entrance on a straight line to: 1....
-
11B-233.3.1.2.6.2 Test number one, individual building test
To determine site impracticality, the slope would be measured at ground level from the point of the planned entrance on a straight line to: 1....
-
Elevator Car Requirements [§407.4.2 – §407.4.5]
Other requirements for elevator cars include: compliant floor surfaces a maximum 1¼” horizontal clearance between car platform sill and hoistway landing a self-leveling...
-
11B-306.1 General
Where space beneath an element is included as part of clear floor or ground space or turning space, the space shall comply with Section 11B-306....
-
306.1 General
Where space beneath an element is included as part of clear floor or ground space or turning space, the space shall comply with 306....
-
11B-306.1 General
Where space beneath an element is included as part of clear floor or ground space or turning space, the space shall comply with Section 11B-306....
-
11B-306.1 General
Where space beneath an element is included as part of clear floor or ground space or turning space, the space shall comply with Section 11B-306....
-
11B-306.3.3 Minimum required depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (279 mm) deep minimum at 9 inches (229 mm) above the finish floor or ground...
-
11B-306.3.3 Minimum required depth
Where knee clearance is required under an element as part of a clear floor space, the knee clearance shall be 11 inches (279 mm) deep minimum at 9 inches (229 mm) above the finish floor or ground...
-
3.4.6 Surface
The type of surface should be appropriate to the setting and level of development. ...
-
2.1.2.1 Summary of IEC 118‒4 (1981) Standards
2.1.2.1 Summary of IEC 118‒4 (1981) Standards With a source of 1000 Hz equal to the long-time average level of the speech signal applied to the input of the system, the resulting field...
- How To Calibrate a Digital Slope Meter