Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum.
Search Results "Stair Signage"
-
505.7.1 Circular Cross Section
-
505.7.1 Circular Cross Section
505.7.1 Circular Cross Section. Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
§ 38.75(c)
(c) Characters on signs required by paragraphs (a) or (b) of this section shall have a width-to-height ratio between 3:5 and 1:1 and a stroke width-to-height ratio between 1:5 and...
-
NYC Board of Elections: Video 7 - Accessible Signage for New York Poll Sites
-
Re: ADA Sign Products Exit Sign (6" x 3")
Product link is broken adasignproducts.goemerchant-stores.com
-
Vertical Clearance [4.6.5]
Recommendation: Directional signage, including that at entrances, can be very helpful, especially where van spaces are located in one area only....
-
11B-812.8.5 Drive-up
Drive-up EVCS shall not be required to be identified by an ISA.
-
11B-812.8.5 Drive-up
Drive-up EVCS shall not be required to be identified by an ISA.
-
Swimming Pools: ADA Standard Section 242.2
Section 242.2 covers scoping requirements in the current ADA Standards for swimming pools.
-
11B-242.2 Swimming pools
with Section 11B-1009.2; sloped entries complying with Section 11B-1009.3; transfer walls complying with Section 11B-1009.4; transfer systems complying with Section 11B-1009.5; and pool stairs...
-
11B-242.2 Swimming pools
with Section 11B-1009.2; sloped entries complying with Section 11B-1009.3; transfer walls complying with Section 11B-1009.4; transfer systems complying with Section 11B-1009.5; and pool stairs...
-
1011.4, Item 4
4. Each exit access door from an interior room or area to a corridor or hallway that is required to comply with Section 1011.1, shall be identified by a tactile exit sign with the...
-
1011.4, Item 2.2
2.2 “EXIT RAMP DOWN”
-
11B-810.6 Rail station signs
Rail station signs shall comply with Section 11B-810.6. Exception. Signs shall not be required to comply with Sections 11B-810.6.1 and 11B-810.6.2 where audible signs are remotely...
-
Question 6
YES/NO 6. If the accessible route is not the main route to the business, are the directional signs to the accessible route still readable and located...
-
810.6 Rail Station Signs
Rail station signs shall comply with 810.6. EXCEPTION: Signs shall not be required to comply with 810.6.1 and 810.6.2 where audible signs are remotely transmitted to hand-held...
-
703.7.2.1 International Symbol of Accessibility
The International Symbol of Accessibility shall comply with Figure 703.7.2.1. Figure 703.7.2.1 International Symbol of Accessibility
-
703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side. Where a tactile sign is provided at double doors with one active leaf, the...
-
T215.3.2 Stop Request Systems
Where non-rail vehicles stop on passenger request, stop request systems complying with T704.3 shall be provided.
-
T215.3.1 Public Address Systems
Public address systems shall be provided within non-rail vehicles to announce stops and other passenger information.
-
11B-502.8.2 Lettering
The additional sign shall clearly state in letters with a minimum height of 1 inch (25 mm) the following: "Unauthorized vehicles parked in designated accessible spaces not...
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high.