Handrail gripping surfaces shall be continuous along their length and shall not be obstructed along their tops or sides. The bottoms of handrail gripping surfaces shall not be...
Search Results "Stair Signage"
-
505.6 Gripping Surface
-
505.7.1 Circular Cross Section
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1 1/4 inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
505.7.1 Circular Cross Section
505.7.1 Circular Cross Section. Handrail gripping surfaces with a circular cross section shall have an outside diameter of 1¼ inches (32 mm) minimum and 2 inches (51 mm) maximum.
-
§ 38.75(c)
(c) Characters on signs required by paragraphs (a) or (b) of this section shall have a width-to-height ratio between 3:5 and 1:1 and a stroke width-to-height ratio between 1:5 and...
-
NYC Board of Elections: Video 7 - Accessible Signage for New York Poll Sites
-
Vertical Clearance [4.6.5]
Recommendation: Directional signage, including that at entrances, can be very helpful, especially where van spaces are located in one area only....
-
11B-812.8.5 Drive-up
Drive-up EVCS shall not be required to be identified by an ISA.
-
11B-812.8.5 Drive-up
Drive-up EVCS shall not be required to be identified by an ISA.
-
Swimming Pools: ADA Standard Section 242.2
Section 242.2 covers scoping requirements in the current ADA Standards for swimming pools.
-
11B-242.2 Swimming pools
with Section 11B-1009.2; sloped entries complying with Section 11B-1009.3; transfer walls complying with Section 11B-1009.4; transfer systems complying with Section 11B-1009.5; and pool stairs...
-
11B-242.2 Swimming pools
with Section 11B-1009.2; sloped entries complying with Section 11B-1009.3; transfer walls complying with Section 11B-1009.4; transfer systems complying with Section 11B-1009.5; and pool stairs...
-
1011.4, Item 4
4. Each exit access door from an interior room or area to a corridor or hallway that is required to comply with Section 1011.1, shall be identified by a tactile exit sign with the...
-
1011.4, Item 2.2
2.2 “EXIT RAMP DOWN”
-
11B-810.6 Rail station signs
Rail station signs shall comply with Section 11B-810.6. Exception. Signs shall not be required to comply with Sections 11B-810.6.1 and 11B-810.6.2 where audible signs are remotely...
-
Question 6
YES/NO 6. If the accessible route is not the main route to the business, are the directional signs to the accessible route still readable and located...
-
810.6 Rail Station Signs
Rail station signs shall comply with 810.6. EXCEPTION: Signs shall not be required to comply with 810.6.1 and 810.6.2 where audible signs are remotely transmitted to hand-held...
-
703.7.2.1 International Symbol of Accessibility
The International Symbol of Accessibility shall comply with Figure 703.7.2.1. Figure 703.7.2.1 International Symbol of Accessibility
-
703.4.2 Location
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side. Where a tactile sign is provided at double doors with one active leaf, the...
-
T215.3.2 Stop Request Systems
Where non-rail vehicles stop on passenger request, stop request systems complying with T704.3 shall be provided.
-
T215.3.1 Public Address Systems
Public address systems shall be provided within non-rail vehicles to announce stops and other passenger information.
-
11B-502.8.2 Lettering
The additional sign shall clearly state in letters with a minimum height of 1 inch (25 mm) the following: "Unauthorized vehicles parked in designated accessible spaces not...
-
11B-502.8.1 Size
The additional sign shall not be less than 17 inches (432 mm) wide by 22 inches (559 mm) high.