The tops of dining surfaces and work surfaces shall be 28 inches (710 mm) minimum and 34 inches (865 mm) maximum above the finish floor or ground....
Search Results "Hybrid Surface System"
Filters
Commonly Searched Documents
-
902.3 Height
-
2.3.2 IR Receivers
In these instances, the receiving diode can be placed within an oblong lens on the top of the headband, for presumably 360 degree reception, or appear as a rounded protuberance on the surface...
-
4.1.2(13)
(13) If emergency warning systems are provided, then they shall include both audible alarms complying with 4.28.2 and visual alarms complying with 4.28.3....
-
11B-240.1 General
In existing play areas, where play components are relocated for the purposes of creating safe use zones and the ground surface is not altered or extended for more than one use zone, the...
-
11B-219 Assistive listening systems.
[See subsections ...]
-
11B-219 Assistive listening systems
[See subsections ...]
-
Ampetronic ILD1000G Professional Rack Mountable Audio Induction Loop Driver Hearing System
The ILD1000G sets the standard for high performance professional perimeter induction loop systems....
-
Figure 703.7.2.4 International Symbol of Access for Hearing Loss – Drawing from the U.S. Access Board
-
5.2.2 Transfer Surface Size for Equipment Used by Patients in Seated Position
5.2.2 Transfer Surface Size for Equipment Used by Patients in Seated Position....
-
3. Study Findings
[See subsections ...]
-
SlabGasket™ Expansion Joint Replacement Solution
SlabGasket - Expansion Joint Replacement Do you have unsightly weeds in those cracks and crevices? Are the expansion joints in your sidewalk, driveway, patio or pool now rotten or...
-
§ 38.83(b)(6) Platform surface
(6) Platform surface. The lift platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant....
-
Audio Induction Loop
Audio Induction Loop This system uses a wire loop to receive input from a public address system or microphone and transmits sound by creating a magnetic field within the loop....
-
Components of Accessible Routes
[See subsections ...]
-
M301.2.3.1 End Transfer Surface
End transfer surfaces shall be 28 inches (710 mm) wide minimum and 17 inches (430 mm) long minimum. ...
-
M301.2.3.2 Side Transfer Surface
Side transfer surfaces shall be 28 inches (710 mm) wide minimum and 28 inches (710 mm) long minimum....
-
Ampetronic ILD500G Professional Rack Mountable Audio Induction Loop Driver Hearing System
Conference facilities Theatres Sports halls Lecture Halls Cinemas Equipment supplied as standard with the ILD500 Handbook and installation instructions 197 x 252mm loop system...
-
Ampetronic ILD122 Professional Rack Mountable Audio Induction Loop Driver Hearing System
halls Educational environments Places of worship Lecture Halls Equipment supplied as standard with the ILD122 Handbook and installation instructions 197 x 252mm loop system...
-
Ampetronic ILD300 Professional Rack Mountable Audio Induction Loop Driver Hearing System
halls Educational environments Places of worship Lecture Halls Equipment supplied as standard with the ILD300 Handbook and installation instructions 197 x 252mm loop system...
-
11B-503.4 Floor and ground surfaces
Vehicle pull-up spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle pull-up space they serve. Changes in...
-
11B-503.4 Floor and ground surfaces
Vehicle pull-up spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle pull-up space they serve. Changes in...
-
11B-812.3 Floor or ground surfaces
Vehicle spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle space they serve. Changes in level, slopes...
-
11B-812.3 Floor or ground surfaces
Vehicle spaces and access aisles serving them shall comply with Section 11B-302. Access aisles shall be at the same level as the vehicle space they serve. Changes in level, slopes...
-
I. Introduction to the Study
In addition, the ground surface must meet the ASTM F1951‒99 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment. ...
