This means that the connection points on a system must comply with a standard specification that is available to other manufacturers....
Search Results "Direct Connection"
Filters
Commonly Searched Documents
-
Section 1194.26 Desktop and Portable Computers (Preamble, Section-by-Section Analysis)
-
1015.3 Height
On stairways and stepped aisles, from the line connecting the leading edges of the tread nosings. On ramps and ramped aisles, from the ramp surface at the guard....
-
A) Accessible Parking
Access aisle of at least 60-inch width must be level (1:50 maximum slope in all directions), be the same length as the adjacent parking space(s) it serves and must connect to an accessible...
-
5.4.9 Interruptions along Transfer Support Gripping Recommendation for M301 and M302
The elements, bars, pickets, spacers, panels, and similar features, connect to the transfer support and may interrupt the gripping surface....
-
R302.7 Surfaces
The surfaces of pedestrian access routes and elements and spaces required to comply with R302.7 that connect to pedestrian access routes shall be firm, stable, and slip resistant and shall...
-
E206.1 General (Section-by-Section Analysis)
First, it requires telecommunications products that provide voice communication to provide a standard non-acoustic connection for a TTY unless the product includes a TTY....
-
Alterations and Additions [§206.2.3.1, §202.4]
The accessible route must connect each level served by the new stair or escalator (except where a compliant connecting accessible route already exists)....
-
15. When are "path of travel" obligations triggered?
An accessible "path of travel" is a continuous route connecting the altered areas to an entrance and other elements (i.e., toilet rooms, drinking fountains, and public telephones) that serve...
-
Telecommunications. (Section-by-Section Analysis)
by telephone for individuals with disabilities, including the use of automated attendant systems, which are electronic, automated systems and that are a common method for answering and directing...
-
11B-250.1 General
Exceptions: Curb ramps and blended transitions with detectable warnings complying with Section 11B-247 may be used to connect raised circulation paths and pedestrian crossings within...
-
[A] 101.4.1 Gas
These requirements apply to gas piping systems extending from the point of delivery to the inlet connections of appliances and the installation and operation of residential and commercial...
-
End Note
For more information about the ADA and business, visit the Department of Justice ADA Business Connection at www.ada.gov....
-
Technical Requirements [1018 and 1018.1, Exception 3]
The technical requirements for beach access routes include specific provisions for connections, the surface, clear width, obstacles, openings, running slope, cross slope, resting intervals...
-
§8.3 Accessible route
Accessible route means a continuous unobstructed path connecting accessible elements and spaces in a building or facility that complies with the space and reach requirements of applicable...
-
A. Entry Doors
Do entry doors, connecting room doors, and interior doors (except doors to shallow closets) into and within all guestrooms and suites allow 32" clear passage width so persons who use wheelchairs...
-
B5. Curb Ramp
[ADA Stds 4.6.6] Yes _____ No _____ If No, is there another area with a curb ramp connected to an accessible route that could serve as the drop-off area?...
-
Vertical Clearance
A minimum vertical clearance of 114 inches is required at passenger loading zones and along at least one vehicular route connecting accessible loading zones with site entrance and exits....
-
Problem Three
Make sure the accessible parking spaces connect to an accessible route to the entrance. Provide a sign designating each accessible parking space....
-
Accessible Route
A continuous unobstructed path connecting all accessible elements and spaces of a building or facility....
-
[A] 101.4.3 Plumbing
Plumbing Code shall apply to the installation, alteration, repair and replacement of plumbing systems, including equipment, appliances, fixtures, fittings and appurtenances, and where connected...
-
§382.15(b)(2)
(2) The assurance must also commit the contractor to implementing directives issued by your CROs under §§382.151 through 382.153....
-
A2
Is the vehicle pull-up area relatively level (1:50 or 2% maximum slope in all directions)? Yes No...
-
Software
Programs, procedures, rules and related data and documentation that direct the use and operation of ICT and instruct it to perform a given task or function....
-
4.8.4(3)
(3) If ramps change direction at landings, the minimum landing size shall be 60 in by 60 in (1525 mm by 1525 mm)....