Figure 305.7.1 Maneuvering Clearance in an Alcove, Forward Approach...
Search Results "Bedside Clearance"
Commonly Searched Documents
-
305.7.1 Forward Approach
-
604.3.1 Size
Clearance around a water closet shall be 60 inches (1525 mm) minimum measured perpendicular from the side wall and 56 inches (1420 mm) minimum measured perpendicular from the rear wall....
-
305.7.2 Parallel Approach
Figure 305.7.2 Maneuvering Clearance in an Alcove, Parallel Approach...
-
306.3.1 General
Space under an element between 9 inches (230 mm) and 27 inches (685 mm) above the finish floor or ground shall be considered knee clearance and shall comply with 306.3....
-
604.3.1 Size
Clearance around a water closet shall be 60 inches (1525 mm) minimum measured perpendicular from the side wall and 56 inches (1420 mm) minimum measured perpendicular from the rear wall....
- Hager Companies Round Wrought Door Pull 4
- Hager Companies Round Wrought Door Pull 3
- Hager Companies Round Offset Pull 11
- Hager Companies Round Wrought Door Pull 12
-
8.2 READING AND STUDY AREAS
Clearances between fixed accessible tables and study carrels shall comply with 4.3....
- Hager Companies Round Offset Door Pull 23Q
- Hager Companies Round Wrought Door Pull 5D
-
I. Parking Garage
Does the parking garage serving the lodging facility allow at least 98" of vertical clearance for vehicles with raised roofs to approach, use and exit the accessible parking spaces?...
-
8.2 Reading and Study Areas
Clearances between fixed accessible tables and between study carrels shall comply with 4.3....
-
Back Entry
visual acuity Recessed area rug Grill in the fireplace for year round healthy cooking Automatic opener which can be operated by wheelchair users on a door without clearances...
-
211 and 602 Drinking Fountains
1991 Standards require wall and post-mounted cantilevered drinking fountains mounted at a height for wheelchair users to provide clear floor space for a forward approach with knee and toe clearance...
-
2.2.2 Structural Anthropometry (i.e. Body and WhMD Dimensions)
Breadth/Width: Lateral Measure of Shoulder Clearances Length/Depth: Shoulder Clearances in Relative Position to the Wheelchair, Deltoid Arc 9 Olecranon, Bottom* ...
-
Transfer Entry
For those reasons, the opening provided to transfer from a wheelchair or mobility device must provide sufficient clearance for transfer....
-
180 Turns Around Obstructions
Additional clearance is required at 180 degree turns around an element that is less than 48” wide....
-
Doors: ADA Standard Section 604.8.1.2
Section 604.8.1.2 covers the current ADA Standards for wheelchair accessible compartment doors.
-
Height: ADA Standard Section 505.4
Section 505.4 covers the current ADA Standards for the height of the top of the gripping surface of handrails.
-
11B-505.4 Height
Sufficient vertical clearance between upper and lower handrails, 9 inches (230 mm) minimum, should be provided to help prevent entrapment. ◼...
-
Are the elements of path of travel and accessible routes substantively the same (such as slope, vertical clearance, width of path of travel, etc.)?
RESPONSE: The terms ACCESSIBLE ROUTE and PATH OF TRAVEL are distinct but related. Accessible route is a fundamental term used to describe, “A continuous unobstructed path connecting...