No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and that the lift platform accommodate a wheelchair measuring 30 inches by 48 inches....
Search Results "Measuring Instrument"
Commonly Searched Documents
-
Is a transportation operator required to procure vehicles with lifts that have a design load of more than 600 pounds?
-
Is a transportation operator required to procure vehicles with lifts that have a design load of more than 600 pounds?
No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and that the lift platform accommodate a wheelchair measuring 30 inches by 48 inches....
-
If the Passenger Poses a Direct Threat to the Health and Safety of Others
that person to provide a medical certificate stating that the disease at its current stage would not be transmittable during the normal course of a flight or, if applicable, describing measures...
-
11B-411.2.1.2.3 Accessibility function button
The dots shall be spaced ¼ inch (6.4 mm), measured center to center, in the form of an equilateral triangle with a vertex pointing up. ...
-
11B-411.2.2.2 Verbal identification
Auditory volume shall be at least 10 dB above ambient sound level, but shall not exceed 80 dB, measured 36 inches (914 mm) in front of the elevator entrance and at 48 inches (1219 mm) above...
-
407.2.2.3 Audible Signals
The audible signal and verbal annunciator shall be 10 dB minimum above ambient, but shall not exceed 80 dB, measured at the hall call button. EXCEPTIONS: 1....
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
703.3.1 Dimensions and Capitalization
Table 703.3.1 Braille Dimensions Measurement Range Minimum in Inches Maximum in Inches Dot base diameter 0.059...
-
Forward Reach [4.2.5]
Forward reaches are measured to the edge of available clear floor space. This accommodates high and low reaches and assumes some forward bending....
-
Printable Room Layouts
Measurements shown are adequate for ensuring accessibility, but more space is highly recommended for aisles, paths between chairs and tables, around the perimeter of the room, and around...
-
C. Defendants' Transaction Counter
“The counter uniformly measures less than 36 inches high.” Id. The submissions from the Court and the parties do not clearly state the length of the transaction counter as built....
-
5.2 Distributing Receivers
Taking appropriate hygienic measures after receivers are returned (e.g. spraying or wiping foam cushions with an antiseptic solution and replacing disposable cushions)....
-
11B-411.2.2.2 Verbal identification
Auditory volume shall be at least 10 dB above ambient sound level, but shall not exceed 80 dB, measured 36 inches (914 mm) in front of the elevator entrance and at 48 inches (1219 mm) above...
-
11B-411.2.2.2 Verbal identification
Auditory volume shall be at least 10 dB above ambient sound level, but shall not exceed 80 dB, measured 36 inches (914 mm) in front of the elevator entrance and at 48 inches (1219 mm) above...
- Independent Living Center (TILC) - Joplin, MO
- Assisted Living Directory - Connecticut Assisted Living Facilities & Senior Care
- Handbook of Construction Tolerances by David Kent Ballast FAIA, CSI
- Better Living LINEA Luxury Soap Dispenser
- Just Manufacturing Classroom Concealed Ledgemount Single Handle Restricted Swing Faucet
- Precision Safe Sidewalks LLC Sidewalk Trip Hazard Repair Service
- M-D Building Products, Inc. GEN2 SmartTool™ Digital Level
- AJW Architectural Products U109 16 oz. Plastic Bulb Liquid Soap Dispenser - Surface Mounted
- Just Manufacturing Deck Mounted Classroom Faucet with Vandal Resistant Lever Handle
-
ASTM
ASTM F 1292 establishes a uniform means to measure and compare characteristics of surfacing materials to determine whether materials provide a safe surface under and around playground equipment...