If structural changes are needed to achieve program accessibility, they must be made as expeditiously as possible, but in no event later than January 26, 1995....
Search Results "Baby Changing Station"
Filters
Commonly Searched Documents
-
II-5.6000 Time periods for achieving program accessibility
-
11B-812.5 Accessible routes
[See subsections ...]
-
11B-812.8.3 Twenty-six or more
Where twenty-six or more total EVCS are provided, all required van accessible and all required standard accessible EVCS shall be identified by an ISA complying with Section...
-
11B-812.8 Identification signs
EVCS identification signs shall be provided in compliance with Section 11B-812.8.
-
11B-812.4 Vertical clearance
Vehicle spaces, access aisles serving them, and vehicular routes serving them shall provide a vertical clearance of 98 inches (2489 mm) minimum. Where provided, overhead cable...
-
11B-812.6.3 Ambulatory
Vehicle spaces serving ambulatory EVCS shall be 120 inches (3048 mm) wide minimum and shall not be required to have an adjacent access aisle.
-
11B-812.8.2 Five to twenty-five
Where five to twenty-five total EVCS are provided, one van accessible EVCS shall be identified by an ISA complying with Section 11B-703.7.2.1. The required standard accessible EVCS...
-
11B-812.5.3 Relationship to accessible routes
Vehicle spaces and access aisles shall be designed so that when the vehicle space is occupied the required clear width of adjacent accessible routes is not obstructed. A curb, wheel...
-
1010.1.6 Thresholds
Raised thresholds and floor level changes greater than ¼ inch (6.4 mm) at doorways shall be beveled with a slope not greater than one unit vertical in two units horizontal (50-percent slope...
-
Issue: Self-Evaluation and Transition Plans
Common Problem: City governments often have not conducted thorough self-evaluations of their current facilities, programs, policies, and practices to determine what changes are necessary...
-
§104.22(d) Time period
A recipient shall comply with the requirement of paragraph (a) of this section within sixty days of the effective date of this part except that where structural changes in facilities are...
-
General: ADA Standard Section 226.1
Section 226.1 of the ADA Standards covers information in the current ADA Standards on scoping requirements for dining surfaces and work surfaces.
-
11B-208.1 General
For the purposes of this section, electric vehicle charging stations are not parking spaces; see Section 11B-228. Exceptions: 1....
-
Adjustable gap protocol
protocol: From initial setup, just the horizontal distance between the WMD and platform was incrementally increased by placing plywood blocks of 3.5” (8.9cm) width between the transfer station...
-
§ 38.113(d)(1) Requirements
Cars which provide level-boarding in stations with high platforms shall be coordinated with the boarding platform or mini-high platform design such that the horizontal gap between a car...
-
502.3.9 Event Notification (Section-by-Section Analysis)
502.3.9 Event Notification (Section-by-Section Analysis) This section proposes that programmatic notification of events relevant to user interactions— including changes in a component...
-
Section 1194.41 Information, Documentation, and Support (Preamble, Section-by-Section Analysis)
No substantive comments were received regarding this provision and no changes other than editorial changes were made in the final rule....
-
What Works on NBC: Giving the Gift of Golf to Wounded Warriors
From NBC Nightly News, Thursday, June 14, 2007, reported by Roger O'Neil: News story about a Pro golfer, Jim Estes, who is helping wounded war veterans. Estes is providing free golf...
-
SECTION-BY-SECTION ANALYSIS AND RESPONSE TO COMMENTS
This section provides a detailed description of the Department's proposed changes to the title III regulation, the reasoning behind the proposals, and responses to public comments received...
-
§8.21(c)(3) Time period for compliance
The recipient shall comply with the obligations established under this section within sixty days of July 11, 1988, except that where structural changes in facilities are undertaken, such...
-
PEMKO 2 1/2" Saddle Threshold No. 166
About Commercial Thresholds Pemko manufactures thresholds in several materials to meet customer needs. Extruded Aluminum thresholds are manufactured of tempered aluminum, 6063-T6....
-
PEMKO 5" Heavy Duty Threshold No. 1715
About Commercial Thresholds Pemko manufactures thresholds in several materials to meet customer needs. Extruded Aluminum thresholds are manufactured of tempered aluminum, 6063-T6....
-
PEMKO 7" Saddle Threshold No. 176
About Commercial Thresholds Pemko manufactures thresholds in several materials to meet customer needs. Extruded Aluminum thresholds are manufactured of tempered aluminum, 6063-T6....
-
PEMKO 5" Saddle Threshold No. 154
About Commercial Thresholds Pemko manufactures thresholds in several materials to meet customer needs. Extruded Aluminum thresholds are manufactured of tempered aluminum, 6063-T6....
