Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (280 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
Search Results "Wheelchair Seating Space"
-
1008.4.4 Entry Points and Seats
-
1008.4.4 Entry Points and Seats
Where play components require transfer to entry points or seats, the entry points or seats shall be 11 inches (280 mm) minimum and 24 inches (610 mm) maximum from the clear floor or ground...
-
4.1.6(4)(f)
(i) In alterations where it is structurally impracticable to disperse seating throughout the assembly area, seating may be located in collected areas as structurally feasible....
-
Amos Winter: The cheap all-terrain wheelchair | TED Talks
How do you build a wheelchair ready to blaze through mud and sand, all for under $200?...
-
Dome Spacing: ADA Standard Section 705.1.2
Truncated domes in a detectable warning surface shall have a center-to-center spacing of 1.6 inches (41 mm) minimum and 2.4 inches (61 mm) maximum, and a base-to-base spacing of 0.65 inch...
-
11B-811.2 Clear floor or ground space
A clear floor or ground space complying with Section 11B-305 shall be provided....
-
11B-811.2 Clear floor or ground space
A clear floor or ground space complying with Section 11B-305 shall be provided....
-
Access-Able Designs Tub Transfer Bench SH-414-2SDL
Use this seat with the fold-down legs when there is no inner ledge for the regular seat to rest on. ...
-
1607.8.2 Grab bars, shower seats and dressing room bench seats
Grab bars, shower seats and dressing room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab...
-
1607.8.2 Grab bars, shower seats and dressing room bench seats
Grab bars, shower seats and dressing room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab...
-
1607.8.2 Grab bars, shower seats and dressing room bench seats
Grab bars, shower seats and dressing room bench seat systems shall be designed to resist a single concentrated load of 250 pounds (1.11 kN) applied in any direction at any point on the grab...
-
Some wheelchairs weigh more than 600 pounds when occupied, and the design load of the lifts on our vehicles is 800 pounds. Is a transportation operator required to carry these “overweight” wheelchairs?
Transportation operators must carry a wheelchair and occupant if the lift and vehicle can physically accommodate them....
-
11B-802.1.1 Floor or ground surface
The floor or ground surface of wheelchair spaces shall comply with Section 11B-302. Changes in level, slopes exceeding 1:48, and detectable warnings shall not be permitted....
-
Ticket pricing. (Section-by-Section Analysis)
The proposed rule codifies the Department's longstanding policy that public accommodations cannot impose a surcharge for wheelchair spaces. ...
-
Battery-powered Wheelchairs
Battery-powered Wheelchairs Carriers must accept a passenger’s battery-powered wheelchair, including the battery, as checked baggage unless baggage compartment size and aircraft airworthiness...
-
11B-809.10.7.4 Seat height
Water closet seats shall be 15 inches (381 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat above the finish floor....
-
11B-809.10.7.4 Seat height
Water closet seats shall be 15 inches (381 mm) minimum and 19 inches (483 mm) maximum measured to the top of the seat above the finish floor....
-
Bobrick MatrixSeries Seat-Cover Dispenser B-5221
Dispenses 250 single- or half-fold toilet seat covers. Fills from bottom. Unit 16 1⁄8" W, 11 1⁄2" H, 2 1⁄2" D (410 x 290 x 65mm)....
-
American Specialties Recessed Toilet Seat Cover Dispenser 0477
Door has tumbler lock, dispenses 500 single or half-fold seat covers. Covers are self-feeding until supply is depleted. Unit is manually reloaded with a full box through access door....
-
Gamco Recessed Seat-Cover Dispenser - TSC-2
Capacity: Dispenses 500 toilet seat covers. Unit 17-1/8" W x 12-3/4" H x 2-1/4" D (435 x 324 x 57mm)....
-
382.129 What other requirements apply when passengers’ wheelchairs, other mobility aids, and other assistive devices must be disassembled for stowage?
382.129 What other requirements apply when passengers’ wheelchairs, other mobility aids, and other assistive devices must be disassembled for stowage?...
-
Figure 610.2 Bathtub Seats – Drawing from the U.S. Access Board
-
American Specialties Folding Tub Seat Model 8358 3D Model
Requires the Premium User plan or above. (Login or upgrade your account!) -
Bobrick ClassicSeries Recessed Seat-Cover Dispenser B-301
Dispenses 500 toilet seat covers. Rough Wall Opening: 15 5/8" W, 11" H, 2 5/8" min. depth (395 x 285 x 67mm)....
