Are the entrances to accessible public restrooms and fitting rooms free of obstacles that block the clear wall and floor space needed for opening the door (between 18 and 42 inches on the...
Search Results "Door Hardware"
-
Question 19
-
HEWI Push/Pull Handle set to EN 179
Secure Handle on Heavy Doors Push/pull handle sets can be used on emergency exits at which a panic situation is not to be expected, because the people in the building are familiar with...
-
Cal-Royal NM Series Extra Heavy Duty Mortise Lockset
Features & Specifications: For Doors - 1-3/4" thick Backset - 2-3/4" Lockcase - Heavy gauge zinc chromate steel Front - Heavy gauge steel 8" x 1-1/4" x 3/32"....
-
Doorways: ADA Standard Section 405.7.5
Section 405.7.5 covers the current ADA Standards for doorway maneuvering clearance at ramp landings.
-
Corbin Russwin Inc. SE LP10 Mortise Lock
in system design Innovative actuator design provides superior reliability Integrated design incorporates all accesscontrol components, including card reader, door...
-
Allegion Falcon RU/RW Series Mechanical Locks
Installs with minimal rework to existing doors while preserving door and frame for cost effective project planning. Falcon’s RU Series satisfies all ADA easy access requirements....
-
11B-604.8.1.1.1 Maneuvering space with in-swinging door
In a wheelchair accessible compartment with an in-swinging door, a minimum 60 inches (1524 mm) wide by 36 inches (914 mm) deep maneuvering space shall be provided in front of the clearance...
-
11B-604.8.1.1.1 Maneuvering space with in-swinging door
In a wheelchair accessible compartment with an in-swinging door, a minimum 60 inches (1524 mm) wide by 36 inches (914 mm) deep maneuvering space shall be provided in front of the clearance...
-
Hager Companies Security Pull T4E
Security Pull Materials: - Stainless steel Certification: - Meets ANSI A156.6 for J401 Pull Plates Note: - For wood doors...
-
19.1 Q. If a sliding door track has a threshold of 3/4, does this trigger requirements for ramps?
The Guidelines at Requirement 4 provide that thresholds at doors, including sliding door tracks, may be no higher than 3/4 and must be beveled with a slope no greater than 1:2....
-
SECTION 1010 DOORS, GATES AND TURNSTILES
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for...
-
SECTION 1010 DOORS, GATES AND TURNSTILES
[DSA-AC] In addition to the requirements of this section, means of egress, which provide access to, or egress from, buildings or facilities where accessibility is required for...
-
4.8.4(4)
(4) If a doorway is located at a landing, then the area in front of the doorway shall comply with 4.13.6.
-
Controls [§404.3.5]
Controls [§404.3.5] Door and gate controls must be compliant as operable parts (operable with one hand and without tight grasping, pinching, twisting of the wrist, or more than 5 lbf)...
-
Elevator Door Requirements [§407.3]
Elevator Door Requirements [§407.3]...
-
Sargent 5100 Series Alarmed Exit Lock
Sargent's line of exit alarms is designed to signal a violation when a door is used for unauthorized exit or passage....
-
DORMA J300 Series Locks
Product features Concealed fasteners on outside rose Fits doors with 4" and 5-1/2" hole centers Door thickness range from 1-3/8"–1-3/4" 2-3/8" or 2-3/4" backset 2-1/2" diameter...
-
Cal-Royal Commander Clutch Mechanism COM Series Cylindrical Lockset
DOOR RANGES - 1 3/8" to 1 3/4" thickness doors. BACKSET - 2 3/4" Standard, 2 3/8", 3 3/4" and 5" optional....
-
PDQ XGT Series Cylindrical Lock
Locksets shall be listed by UL / ULC for ratings of “A” label (3 hours) and less, UL10C / UBC 7-2 (1997) positive pressure, for single doors up to 4’0” x 8’0”....
-
Allegion Schlage S200-Series Mechanical Locks with Tubular Interconnect
heavy-duty lever torsion springs for durability and long life Non-handed levers for easy field installation Extra-strong Everest 29™ patented keys standard for commercial applications Door...
-
4.10.9 Floor Plan of Elevator Cars
Acceptable door opening and inside dimensions shall be as shown in Fig. 22....
-
4.10.9 FLOOR PLAN OF ELEVATOR CARS
Acceptable door opening and inside dimensions shall be as shown in Fig. 22....
-
Cal-Royal Products Grade 1 Cylindrical Lockset Calypso CAL Series
DOOR RANGES - 1 3/8" to 2" thickness doors. LATCHBOLT -1/2" Throw solid brass, reversible for RH or LH applications. UL Listed....
-
Cal-Royal Apollo ALC Series Cylindrical Lockset
DOOR RANGES - 1 3/8" to 1 3/4" thickness doors. BACKSET -2 3/4" Standard, 2 3/8" optional....
