Note the reduced maximum height for reaches over obstructions beyond certain depths. This is important where controls and switches are mounted on walls above counters....
Search Results "Compartment Depth"
Filters
Commonly Searched Documents
-
Height [4.27.3]
-
4.21.3 Seat
The seat shall be mounted 17 in to 19 in (430 mm to 485 mm) from the bathroom floor and shall extend the full depth of the stall....
-
11B-809.10.5.1 Clear floor space
The area under a lavatory, located at the control end of the tub, shall be permitted to encroach on the clear floor space provided the lavatory is 19 inches (483 mm) maximum in depth, and...
-
Stowage of Wheelchairs and Mobility Aids
These devices have priority over other items in the baggage compartment....
-
11B-805.6 Hand washing fixtures, lavatories and sinks
Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
11B-805.6 Hand washing fixtures, lavatories and sinks
Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
11B-603.2.3 Door swing
Other than the door to the accessible water closet compartment, a door in any position, may encroach into the turning space by 12 inches (305 mm) maximum....
-
Q3.) What are the types of “manufacturing processes” that were anticipated where the advisory says “tolerances recognized by this provision include… “those that may be a necessary consequence of a particular manufacturing process”?
To simplify the tolerance assessment, the 2010 Standards specify that the shower compartment be measured at the center points of opposing sides but the expectation is that the width at the...
-
Location and Size
that is opposite the transfer side (see M301.2.3 and M302.2.3) similar to the provisions in the 2004 ADA and ABA Accessibility Guidelines for grab bars provided at bathtubs and shower compartments...
-
5.8.2.4 Unobstructed Floor Space Recommendation
To consider overall knee and toe clearance, the Committee used female-only anthropomorphic data that defined abdomen-toe depths to ensure that a patient’s toes would not hit the gantry....
-
The Reasonable Accommodation Workshop for Absence and Disability Managers
Workshop for Absence and Disability Managers Cost: $149.00 Instructor: Roy Matheson, ADAC Contact Hours: 5 NBCOT CRAC This learning experience is for those who seek an in-depth...
-
Conclusions
A depth of 15in. for a seating surface was found to be suitable based on median values of buttock-popliteal length and wheelchair seat depths....
-
Selection of Methodology
SECTION #3 Trail pre‐installation specifications (soil type/composition, slope of surface) SECTION #4 Sub‐base installation (date of installation, aggregate type used, aggregate depth...
-
2.1
Entry of this Consent Order brings certainty regarding Cinemark's obligation concerning the placement and location of wheelchair spaces, and the depth of the cross-aisles, at all of Cinemark's...
-
References:
“Revised Knee Clearance Depth and Footrest Clearance dimensions for sizing of mammography equipment.” Memorandum. April 23, 2013....
-
ADA Coordinator Certification Program
ACTCP certification verifies that participants have completed training in required content areas and have a depth of knowledge in ADA issues....
-
Locating Controls & Devices: Percent of People Who Can Reach the Matrix Cell Indicated While Holding No Weight - Forward Approach Scooter
Horizontal distances in the positive range represent offset distance away from the body (or barrier depth) when reaching over an obstruction in relation to the forward-most point, and the...
-
11B-1009.4.5 Grab bars
Grab bars shall be perpendicular to the pool wall and shall extend the full depth of the transfer wall....
-
11B-1009.4.5 Grab bars
Grab bars shall be perpendicular to the pool wall and shall extend the full depth of the transfer wall....
-
Salsbury Industries Designer Wood Locker Triple Tier 3 Wide
cherry or mahogany finish and include a black name / number plate Designer lockers include a black laminated base and are available in 5 feet and 6 feet high (add 4" for base) Each compartment...
-
Salsbury Industries Designer Wood Locker Triple Tier - 1 Wide
cherry or mahogany finish and include a black name / number plate Designer lockers include a black laminated base and are available in 5 feet and 6 feet high (add 4" for base) Each compartment...
-
Salsbury Industries Designer Wood Locker Double Tier 'S' Style 3 Wide
cherry or mahogany finish and include a black name / number plate Designer lockers include a black laminated base and are available in 5 feet and 6 feet high (add 4" for base) Each compartment...
-
Salsbury Industries Designer Wood Locker Double Tier 3 Wide
cherry or mahogany finish and include a black name / number plate Designer lockers include a black laminated base and are available in 5 feet and 6 feet high (add 4" for base) Each compartment...
