Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (430 mm) maximum above the finish floor or ground. Urinals shall be 13 1/2 inches (345 mm) deep minimum...
Search Results "Tread Depth"
Filters
Commonly Searched Documents
-
605.2 Height and Depth
-
Figure 605.2 Height and Depth of Urinals – Drawing from the U.S. Access Board
-
Balco Inc. IllumiTread Photoluminescent Egress Markings System Section
Requires the Premium User plan or above. (Login or upgrade your account!) -
7.4.1 Surface
The trail tread surface, including resting intervals and passing spaces, shall be both firm and stable....
-
11B-605.2 Height and depth
Urinals shall be the stall-type or the wall-hung type with the rim 17 inches (432 mm) maximum above the finish floor or ground. Urinals shall be 13½ inches (343 mm) deep minimum...
-
504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (13 mm) maximum....
-
504.5 Nosings
The radius of curvature at the leading edge of the tread shall be 1/2 inch (13 mm) maximum....
-
504.5 Nosings
The radius of curvature at the leading edge of the tread shall be ½ inch (13 mm) maximum....
-
American Safety Tread Co., Inc. Type T-24H Contrasting Stripe
Anti-Slip Surface: Each abrasive-filled rib projects above the aluminum base for the greatest exposure of anti-slip surface in any tread now being produced in the United States....
-
Tread Obstacles on Outdoor Recreation Access Routes
A tread obstacle is anything that interrupts the evenness of the tread surface....
-
American Safety Tread Co., Inc. Type T-24 Contrasting Stripe
Anti-Slip Surface: Each abrasive-filled rib projects above the aluminum base for the greatest exposure of anti-slip surface in any tread now being produced in the United States....
-
11B-1009.2.1 Pool lift location
Where the entire pool depth is less than 36 inches (914 mm) or greater than 48 inches (1219 mm), compliance with Section 11B-1009.2.1 shall not be required. [2010 ADA Standards] 1. ...
-
Treads and Risers [4.9.2], Nosings [4.9.3]
Treads must be at least 11 inches wide and uniform....
-
11B-606.7 Sink depth
11B-606.7 Sink depth. Where a forward approach is required at a sink, knee and toe clearance shall be provided in compliance with Section 11B-306....
-
3.3.15.3 Side (lateral) reach – over an obstruction depth of 610 mm
3.3.15.3 Side (lateral) reach – over an obstruction depth of 610 mm The vast majority of WhMD users in our study that displayed some reach capability could not reach at or beyond a 610...
-
4.9.3 Nosings
The radius of curvature at the leading edge of the tread shall be no greater than 1/2 in (13 mm)....
-
4.9.3 NOSINGS
The radius of curvature at the leading edge of the tread shall be no greater than 1/2 in (13 mm)....
-
1009.2.1 Pool Lift Location
Where the entire pool depth is greater than 48 inches (1220 mm), compliance with 1009.2.1 shall not be required. 2....
-
1009.2.1 Pool Lift Location
Where the entire pool depth is greater than 48 inches (1220 mm), compliance with 1009.2.1 shall not be required. 2....
-
7.4.4.4 Turning Space
Where resting intervals are provided adjacent to the trail tread, a turning space complying with ABAAS section 304.3.2 shall be provided. ...
-
1009.2.1 Pool Lift Location
Where the entire pool depth is greater than 48 inches (1220 mm), compliance with 1009.2.1 shall not be required. 2....
-
Sales and Service Counters: ADA Standard Section 904.4
The accessible portion of the counter top shall extend the same depth as the sales or service counter top. , EXCEPTION: In alterations, when the provision of a counter complying with...
-
Submerged Depth
Submerged Depth Lifts must be designed so that the seat will submerge to a minimum of 18 inches below the stationary water level....
-
11B-904.4 Sales and service counters
The accessible portion of the counter top shall extend the same depth as the sales or service counter top....
