When the WALK signal begins, you hear a fast ticking sound”....
Search Results "Signal Timing"
Filters
Commonly Searched Documents
-
Issue 15: Installation Errors Increase Risk
-
Otis Elevator Advanced Lantern Retrofit
FEATURES: Advanced Lantern Retrofit's LED illumination lasts more than 10 times longer than that of incandescent bulbs The lantern displays green illumination for up and red illumination...
-
408.2.2 Hall Signals
Hall signals shall comply with 407.2.2....
-
408.2.2 Hall Signals
Hall signals shall comply with 407.2.2....
-
Signal Level: ADA Standard Section 407.4.8.2.2
Section 407.4.8.2.2: covers the current ADA Standards for the signal level of audible elevator car indicators.
-
4.10.4(1)
(1) Hall lantern fixtures shall be mounted so that their centerline is at least 72 in (1830 mm) above the lobby floor. (See Fig. 20.)
-
E102.5 IETF (Section-by-Section Analysis)
When using RTT, text is received at the same time it is generated....
-
11B-408.2.2 Hall signals
Hall signals shall comply with Section 11B-407.2.2....
-
11B-408.2.2 Hall signals
Hall signals shall comply with Section 11B-407.2.2....
-
11B-408.2.2 Hall signals
Hall signals shall comply with Section 11B-407.2.2....
-
Issue 1: APS volume
Modern pushbutton-integrated devices provide the signal right where it is needed -– at the departure curb –- so it needs to provide only a 2-5 dB gain over ambient noise to signal the pedestrian...
-
Issue 14: Inspection of contractor’s work - Beware of field changes!
Figure 22: When two APS are mounted on an existing signal pole, one is poorly located....
-
Audible WALK indications
When the pedestrian pushbutton is properly located close to the departure curb, a low-volume WALK signal will be adequate for usability....
-
Issue 7: Repair/replacement (put it back right!)
The WALK message was provided at the wrong time for the street toward which the arrow pointed....
-
Vibrotactile WALK indications
The vibrotactile indication is particularly useful for pedestrians who have both hearing and visual impairments and also allows pedestrians to tactually confirm audible signal information...
-
R209.1 General
Where pedestrian signals are provided at pedestrian street crossings, they shall include accessible pedestrian signals and pedestrian pushbuttons complying with sections 4E.08 through 4E...
-
ThyssenKrupp Elevator Signa 4 Signal Fixtures
Signa4TM is our newest line of signal fixtures, featuring a sleek, sophisticated appearance that fits with today's high-tech lifestyle....
-
Other Features
beep), tactile crosswalk maps, and options activated by an extended button push: audible beaconing (useful for directional guidance at irregular or long crossings), extended pedestrian timing...
-
1132A.10 Door signal devices
1132A.10 Door signal devices. Every primary entrance to a covered multifamily dwelling unit shall be provided with a door buzzer, bell, chime or equivalent....
-
Issue 4: Wrong pole! …Wrong message!
However, APS can be wired to a control board in the pedestrian signal head or through the controller, so it may be necessary to move the pedestrian signal head (or to completely rewire each...
-
Pushbutton locator tone
Pushbutton locator tone The pushbutton locator tone is a low-volume tick or tone that repeats constantly, at one-second intervals, during the flashing and steady DON’T WALK...
-
Issue 11: Good vibrations (vibrotactile indications)
The vibrotactile indication provides WALK signal information for pedestrians who are both visually and hearing impaired and also may be used by pedestrians who are visually impaired (with...
-
Tactile arrow
Tactile arrow The tactile arrow on the device must be aligned with the direction of travel on the crosswalk and point toward the street crossing that the pushbutton controls and signals...
-
A4.3.11.4 Two-way Communication
The visible signal requirement could be satisfied with something as simple as a button in the area of rescue assistance that lights, indicating that help is on the way, when the message...
